Airtac SAUD Double Rod Cylinder SAUD80X10
The AirTAC SAUD Double Rod Cylinder SAUD80X10 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 10mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke10 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X10
The AirTAC SAUD80X10 is a double-acting, double-rod profile cylinder. A 25 mm rod exits both ends of the hard-anodized extruded aluminum barrel, meaning push and pull forces are identical at 2268 N each way under 0.5 MPa. This compact body is shorter than an ISO 15552 unit of the same bore. It features a 3/8 inch port, an M20x1.5 rod thread, and adjustable 28 mm air cushions at both ends.
Because the piston travels symmetrically, the rear rod can drive a second tool or trip a switch. Note this SKU lacks a magnet, so it cannot accept magnetic sensors. For high heat, Viton H seals raise the operating limit to 150 C.
Airtac SAUD Double Rod Cylinder SAUD80X10 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X10
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X10 Is Used
Twin-Spindle Machining
Drives two opposing spindles simultaneously with identical 2268 N force, ensuring perfectly synchronized cutting or pressing without rotational twist.
Dual-End Transfer Pusher
Pushes a workpiece from one belt to another using both rod ends, allowing the rear extension to trip a mechanical limit switch for timing.
Is the Airtac SAUD Double Rod Cylinder SAUD80X10 the Right Cylinder?
Select this 80 mm bore when you need 2268 N of equal bidirectional force. If your project requires less thrust, the 63 mm bore provides 1402 N both ways; for heavier duty, the 100 mm bore offers 3681 N. A double-rod design is the right call for anti-rotation tasks, carrying twin tooling, or mounting a switch cam on the back rod. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since this specific SKU has no -S magnet, you cannot mount CMSG or DMSG sensors. Finally, remember the air cushion only decelerates the piston; it does not lock the load. To prevent drifting on air loss, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X10 FAQ
The force is equal in both directions because of the double-rod design. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The 3/8 inch port supplies air to both chambers equally.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG sensors. However, you can still use the protruding rear rod to mechanically trip an external switch.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.