Airtac SAUD Double Rod Cylinder SAUD80X10S
The AirTAC SAUD Double Rod Cylinder SAUD80X10S is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 10mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke10 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X10S
The AirTAC SAUD80X10S is a double-acting, double-rod profile cylinder. A Ø25 mm rod exits both ends of the hard-anodized extruded aluminium barrel, meaning both faces use the rod-side piston area. This yields equal push and pull force of 2268 N each way at 0.5 MPa. The body is inherently shorter than an ISO 15552 cylinder of the same bore. It features a 3/8 inch port, an M20x1.5 rod thread, and 28 mm adjustable air cushions at each end.
Because the -S suffix denotes a built-in piston magnet, this unit supports CMSG, DMSG and EMSG switches for end-of-stroke sensing. The twin rods provide rigid anti-rotation guidance and let you mount a sensor cam or drive two tools simultaneously. Viton H seals can raise the operating ceiling to 150 C.
Airtac SAUD Double Rod Cylinder SAUD80X10S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X10S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X10S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X10S Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from a single body, ensuring parallel contact on sheet metal workpieces without rotational twist.
Dual Diverter Gate
Pushes opposing guide rails simultaneously to realign large cartons on a packaging line, using the equal bidirectional thrust.
Rack Cam Sensing
Uses the extended back rod to carry a switch cam, triggering a storage elevator stop precisely at the end of the 10 mm stroke.
Is the Airtac SAUD Double Rod Cylinder SAUD80X10S the Right Cylinder?
When sizing this 80 mm bore, stepping down to the 63 mm variant gives 1402 N both ways, while stepping up to the 100 mm bore provides 3681 N. Choose this double-rod architecture when your mechanism demands strict anti-rotation accuracy, synchronized twin-tool driving, or a rear rod to trip a switch. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The standard -S magnet enables electronic or reed sensing. For this 10 mm stroke, side loads are minimal, but always support external guides on longer movements to prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X10S FAQ
The force is equal in both directions because the rod exits both ends. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. It never produces a larger single-rod push value.
No. A plain cylinder drifts on air loss or when the valve is centered. The 28 mm adjustable cushion only decelerates the piston near the stroke end. To hold a load securely, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.