Airtac SAUD Double Rod Cylinder SAUD80X110
The AirTAC Airtac SAUD Double Rod Cylinder SAUD80X110 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 110mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke110 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X110
The AirTAC SAUD80X110 is a double-acting, double-rod profile cylinder. An extruded aluminium barrel keeps the unit shorter than a standard ISO 15552 model of the same 80 mm bore. Because a rod protrudes from both ends, the output is 2268 N each way at 0.5 MPa. The 3/8" port and M20x1.5 rod thread handle robust flows.
You can mount it using SC-series FA or LB brackets. Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For high heat up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD80X110 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X110 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X110
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X110 Is Used
Twin Spindle Drilling
Drives two synchronized machining heads from one piston, ensuring both holes are bored to identical depths without rotational twist.
Dual Transfer Pusher
Pushes a workpiece from one belt to another using opposing tooling, relying on the equal force to maintain straight lateral movement.
Guided Lift Station
Raises a 100 kg pallet in a vertical lift rig, using the inherent rigidity of the dual rods to prevent the load from binding.
Is the Airtac SAUD Double Rod Cylinder SAUD80X110 the Right Cylinder?
Choose this 80 mm bore if your project demands 2268 N of equal push and pull force. Sizing down, the 63 mm bore delivers 1402 N both ways, while stepping up to the 100 mm bore provides 3681 N. A twin-rod design is the right call when you need anti-rotation stability, want to drive two tools at once, or require a back rod to trip a switch. This non-magnetic variant cannot host sensors. Mounting is limited to Basic, FA, and LB styles. With a 110 mm stroke, side loads are minimal, but always use external guides for any stroke over 300 mm.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X110 FAQ
The output force is equal in both directions because rods exit both ends. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The 3/8" port feeds the chambers to achieve these figures.
No, the air cushions only decelerate the piston near the stroke ends and do not act as a brake. If air is lost, the load will drift. Use an external rod lock or a pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.