Airtac SAUD Double Rod Cylinder SAUD80X475
The AirTAC SAUD Double Rod Cylinder SAUD80X475 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 475mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke475 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X475
The AirTAC SAUD80X475 is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area and push or pull force is identical at 2268 N each way at 0.5 MPa. The extruded aluminum body is shorter than an ISO 15552 cylinder of the same bore.
This SKU has no magnet and cannot take a sensor switch. The 3/8 inch port and M20x1.5 rod thread are fixed by the 80 mm bore.
Airtac SAUD Double Rod Cylinder SAUD80X475 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X475 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X475
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X475 Is Used
Dual-End Transfer Pusher
Drives a conveyor diverter from one end while the opposite rod carries a mechanical stop, keeping timing synchronized without external linkages.
Twin-Tool Machining Station
Mounts two opposing machining heads on a single piston to press and form parts simultaneously with perfectly matched travel distances.
Balanced Vertical Lift
Lifts a 116 kg platen straight up and down with equal force both directions, preventing sagging drift common to single-rod setups.
Is the Airtac SAUD Double Rod Cylinder SAUD80X475 the Right Cylinder?
Choose this 80 mm bore delivering 2268 N equal force both ways when you need anti-rotation guidance or twin tooling. Stepping down, the 63 mm bore gives 1402 N both ways. Stepping up, the 100 mm bore yields 3681 N both ways. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. Because the stroke is 475 mm, fit external guides to prevent rod bending under side loads. This non-magnet version cannot host CMSG or DMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X475 FAQ
The force is equal both ways because rods protrude from both ends. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
No, a plain cylinder drifts without live air; the adjustable cushion only decelerates near stroke end. Use an external rod lock or pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.