Airtac SAUD Double Rod Cylinder SAUD80X60
The AirTAC SAUD Double Rod Cylinder SAUD80X60 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 60mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke60 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X60
The AirTAC SAUD80X60 is a double-acting, double-rod profile cylinder. A Ø25 mm rod extends from both ends of the hard-anodized aluminum extruded barrel, meaning push and pull forces are identical at 2268 N each way at 0.5 MPa. The body is noticeably shorter than a standard ISO 15552 unit of the same bore. It uses a 3/8 inch port and has adjustable 28 mm air cushions at both ends.
Because the rod exits the back cap, you can mount a sensor cam or trip a switch there, though this specific SKU lacks a magnet and cannot take CMSG, DMSG or EMSG switches. The equal force makes it ideal for synchronized twin-tool driving or non-rotating anti-twist guidance.
Airtac SAUD Double Rod Cylinder SAUD80X60 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X60 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X60
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X60 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from opposite rod ends with identical 2268 N force to prevent yaw during heavy press operations.
Anti-Rotation Diverter
Uses the dual-rod geometry to push a sorting gate without twisting under load, maintaining precise alignment on high-speed packaging lines.
Is the Airtac SAUD Double Rod Cylinder SAUD80X60 the Right Cylinder?
Choose the 80 mm bore when you need 2268 N of equal bidirectional force at 0.5 MPa. Stepping down, the 63 mm bore provides 1402 N both ways, while stepping up to the 100 mm bore yields 3681 N. A double-rod design is the right call when your mechanism requires anti-rotation stability, needs to drive two tools at once, or must carry a cam on the rear rod. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. For higher heat environments, specify the Viton H seal for 0 to 150 C operation. Since this is a non-magnetized SKU, it cannot accept position sensors. With a 60 mm stroke, side-load stress is minimal, but always use external guides for longer travels.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X60 FAQ
Because the 25 mm rod exits both ends, the force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The 3/8 inch port feeds both chambers efficiently.
No, a plain SAUD cylinder drifts without live air; the 28 mm cushions only decelerate near the stroke end. For suspended loads, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.