Airtac SAUD Double Rod Cylinder SAUD80X600
The AirTAC SAUD Double Rod Cylinder SAUD80X600 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 600mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke600 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X600
The AirTAC SAUD80X600 is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields exactly 2268 N of output force in both directions at 0.5 MPa. The unit is notably shorter than an ISO 15552 cylinder of the same bore. It features a 3/8 inch port and M20x1.5 rod threads.
Because the piston travels 600 mm, you must support external guides to prevent rod bending under side loads. This SKU lacks a magnet, so it cannot accept position switches. For elevated thermal demands, a Viton H seal option extends operation to 150 C.
Airtac SAUD Double Rod Cylinder SAUD80X600 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X600 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X600
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X600 Is Used
Twin-Tool Transfer
Drives two opposing grippers simultaneously with identical 2268 N thrust, ensuring parts transfer evenly without rotational twist.
Balanced Vertical Lift
Lifts loads up to 116 kg safely using the equal pull force, maintaining stable vertical motion without stroke-end sagging.
Riveting Press
Applies synchronized clamping pressure from both ends of a 600mm span, keeping the workpiece perfectly centered during fabrication.
Is the Airtac SAUD Double Rod Cylinder SAUD80X600 the Right Cylinder?
Select this 80mm bore model when your mechanism demands equal push and pull thrust, such as twin-tool driving or synchronized non-rotating guidance. Stepping down to the 63mm bore drops the equal force to 1402 N at 0.5 MPa, while stepping up to the 100mm bore raises it to 3681 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Because the 600mm stroke is long, always use external linear guides to absorb side loads and prevent rod bending. Note this non-magnetic SKU cannot host sensors; choose an -S variant if you need CMSG or DMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X600 FAQ
The double-rod design provides equal force both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. It never produces a larger single-rod push value.
No, a plain SAUD80X600 drifts on air loss because the 28mm adjustable cushions only decelerate near stroke ends. For secure load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.