Airtac SAUD Double Rod Cylinder SAUD80X600S
The AirTAC SAUD Double Rod Cylinder SAUD80X600S is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 600mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke600 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X600S
The AirTAC SAUD80X600S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area. This yields equal push and pull force of 2268 N each way at 0.5 MPa. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This unit includes the -S magnet option for CMSG, DMSG or EMSG switches. It has a 3/8 inch port, M20x1.5 rod thread, and 28 mm adjustable cushions.
Airtac SAUD Double Rod Cylinder SAUD80X600S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X600S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X600S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X600S Is Used
Synchronized Transfer
Drives two parallel conveyor pick-off arms at once, keeping the stroke perfectly synchronized without twisting.
Twin Spindle Lift
Lifts a dual-spindle machining head with equal force in both directions, preventing droop on the return stroke.
Cam Trip Sensing
Uses the protruding back rod to carry a switch cam, tripping an EMSG sensor for mid-stroke positioning.
Is the Airtac SAUD Double Rod Cylinder SAUD80X600S the Right Cylinder?
Select this 80 mm bore over the smaller 63 mm (1402 N) for higher force, or the larger 100 mm (3681 N) if you need maximum thrust. A double rod is the right call when you need anti-rotation guidance, twin tooling, or a back-end sensor cam. Mounting is limited to Basic, FA flange, and LB foot styles matching the AirTAC SC series. Because the stroke is 600 mm, always use external guides to prevent rod bending under side loads. The -S magnet allows solid state or reed sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X600S FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
No. A plain cylinder drifts without live air, as the adjustable cushion only decelerates near stroke end. Use an external rod lock or pilot-operated check valve for held loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.