Airtac SAUD Double Rod Cylinder SAUD80X60S
The AirTAC SAUD Double Rod Cylinder SAUD80X60S is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 60mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke60 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X60S
The AirTAC SAUD80X60S is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields exactly 2268 N of thrust and pull at 0.5 MPa. The unit is shorter than a standard ISO 15552 cylinder of the same bore.
The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches. The 3/8 inch port and M20x1.5 rod thread are fixed by the 80mm bore. Viton H seals can extend the -20 to 70 C range up to 150 C.
Airtac SAUD Double Rod Cylinder SAUD80X60S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X60S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X60S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X60S Is Used
Twin-Tool Stamping
Drives two identical forming tools simultaneously from opposite rod ends, ensuring perfectly synchronized press operations without phase delay.
Anti-Rotation Lifting
Lifts vertical loads up to 116 kg using the dual rods to prevent piston twist, maintaining strict directional stability without external linear bearings.
Cam-Triggered Sorting
Uses the protruding back rod to physically trip a limit switch or carry a sensor cam, confirming full stroke position on high-speed conveyors.
Is the Airtac SAUD Double Rod Cylinder SAUD80X60S the Right Cylinder?
Choose this 80mm bore when you need 2268 N of equal force both ways. If your application requires less thrust, step down to the 63mm bore providing 1402 N at 0.5 MPa. If you need more power, the 100mm bore offers 3681 N both ways. The double-rod design is ideal for anti-rotation guidance, driving twin tools, or mounting a sensor cam on the back rod. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. Since this 60mm stroke is short, side-load stress is minimal, but always use external guides for longer travels. The -S magnet enables position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X60S FAQ
The force is equal in both directions because the 25mm rod exits both ends. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. We never quote a larger single-rod push value for this double-acting profile cylinder.
No, a plain SAUD cylinder will drift without live air. The adjustable 28mm air cushions only decelerate the piston near the stroke ends; they do not lock the load. For secure holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.