Airtac SAUD Double Rod Cylinder SAUD80X95
The AirTAC SAUD Double Rod Cylinder SAUD80X95 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 95mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke95 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X95
The AirTAC SAUD80X95 is a double-acting, double-rod profile cylinder with an 80mm bore and 95mm stroke. A rod protrudes from both ends, meaning push and pull forces are identical at 2268N each way at 0.5MPa. The extruded aluminium barrel makes it shorter than an ISO 15552 cylinder of the same bore. It features a 3/8 inch port, an M20x1.5 rod thread, and 28mm adjustable air cushions at both ends.
Because the rod exits both faces, output is inherently balanced. The twin rods resist torsional twist for non-rotating duties. This SKU lacks a magnet, so it cannot take a magnetic switch. For high heat up to 150C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD80X95 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X95 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X95
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X95 Is Used
Twin-Tool Stamping
Drives two separate stamping heads simultaneously from one piston, keeping cycle timing perfectly synchronized without torsional deflection.
Dual Transfer Pusher
Pushes a part forward on the forward stroke and retracts a secondary diverter on the back stroke, maximizing automation throughput.
Is the Airtac SAUD Double Rod Cylinder SAUD80X95 the Right Cylinder?
Choose this 80mm bore delivering 2268N equal force both ways, or step down to the 63mm bore for 1402N, or up to the 100mm bore for 3681N. A double rod is the right call when you need anti-rotation guidance, twin tooling, or a back-end cam. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. Since this specific SKU has no magnet, you cannot mount CMSG or DMSG sensors. At 95mm stroke side-load is minimal, but always guide external loads to prevent binding. Remember the cushion only decelerates; use an external rod lock to hold position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X95 FAQ
Force is equal both ways because rods exit both ends. It generates 2268N at 0.5MPa, 3175N at 0.7MPa, and 4082N at 0.9MPa. Operating pressure ranges from 0.15 to 1.0MPa.
No. This specific SAUD80X95 SKU is supplied without a magnet. You must select an -S suffix model to use CMSG, DMSG, or EMSG magnetic switches along the profile barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.