This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI160X75SFA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI160 Standard Cylinder SI160X75SFA
The AirTAC Airtac SI160 Standard Cylinder SI160X75SFA is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 75mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI160X75SFA, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ160 mm
- Stroke75 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI160X75SFA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI160 Standard Cylinder SI160X75SFA
The AirTAC SI160X75SFA is a discontinued double-acting ISO 15552 profile cylinder with a 160 mm bore and 75 mm stroke. It delivers 10053 N push force at 0.5 MPa via a G3/4 port. The direct replacement is the SAI160X75SFA, matching the bore, stroke, force, port, and FA flange mounting interface for existing fixtures.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. The SI -S magnet works with legacy CS1-B/DS1-B sensors, while SAI uses current switches. SAI adds SAIL and BSAI lock variants absent in the SI line.
Airtac SI160 Standard Cylinder SI160X75SFA Technical Specifications
| Model | Airtac SI160 Standard Cylinder SI160X75SFA |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI160X75SFA |
| Bore size | Ø160 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI160X75SFA carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAI160X75SFA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI160 Standard Cylinder SI160X75SFA
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI160 Standard Cylinder SI160X75SFA Is Used
Heavy Press Operations
Drives large forming and stamping presses requiring 10053 N of thrust at 0.5 MPa, utilizing the 75 mm stroke for rapid high-force cycles.
Automated Assembly Clamping
Secures heavy machinery components during machining, leveraging the FA flange mount to withstand significant lateral stress on the factory floor.
Replacing the Airtac SI160 Standard Cylinder SI160X75SFA with the SAI160X75SFA
To replace the SI160X75SFA, order the SAI160X75SFA. Verify the ISO 15552 FA flange mounting, 75 mm stroke, G3/4 port, and the -S magnet for position sensing. If you need to size both ways, neighboring bores are 125 mm and 200 mm; at 0.5 MPa this 160 mm bore gives 10053 N push and 9425 N pull. Note that a plain cylinder drifts without live air—the cushion only decelerates. For load holding, use an external rod lock, pilot check valve, or the SAIL/BSAI lock variants. Rod material options include carbon steel, SUS420J2, or SUS304.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI160X75SFA
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI160 Standard Cylinder SI160X75SFA FAQ
Yes, the SI160X75SFA is discontinued. The direct replacement is the SAI160X75SFA. It shares the exact same ISO 15552 mounting interface, 160 mm bore, 75 mm stroke, output force, G3/4 port, and FA flange, fitting directly into existing fixtures.
This double-acting cylinder has a G3/4 port. The force ratings are 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push at 0.7 MPa, 18095 N push at 0.9 MPa, and a theoretical maximum of 2050 kgf at 1.0 MPa.
Related AirTAC SAI Cylinders
Request a Quote for the SAI160X75SFA
Send us the quantity and destination. We confirm price, stock and lead time on the SAI160X75SFA replacement — usually within 7-8 hours.