This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU32X360, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU32X360
The AirTAC Airtac SU32~50 Standard Cylinder SU32X360 is a double-acting profile-type standard cylinder with a Ø32mm bore and 360mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU32X360, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke360 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAU32X360
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU32X360
The AirTAC SU32X360 is a discontinued double-acting profile-type cylinder with a 32 mm bore and 360 mm stroke. It delivers 402 N push force at 0.5 MPa via a 1/8 inch port. AirTAC replaced this unit with the SAU32X360, a direct alternative retaining the exact bore, stroke, output force, port size, and SC-series mounting compatibility.
Because this is a non-magnet SKU, it cannot accept a sensor. The SAU upgrade additionally supports current CMSG/DMSG/EMSG switches (the legacy SU used CS1-B/DS1-B) and introduces the SAUF built-in 4M valve variant. Note that standard air cushions only decelerate the load; they do not hold it without live air.
Airtac SU32~50 Standard Cylinder SU32X360 Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU32X360 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU32X360 |
| Bore size | Ø32 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU32X360 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAU32X360 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU32X360
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU32X360 Is Used
Package Sorting Diverter
Routes small parcels on a 360 mm stroke with a safe 241 N working load, relying on adjustable cushions to decelerate the 32 mm profile body smoothly.
Light Shelf Pusher
Indexes lightweight totes out of storage racks using 402 N of push force at 0.5 MPa, dropping directly into existing SC-series bracketry.
Small Part Ejector
Cycles finished components out of a machining area at 30-800 mm/s, requiring external guides to prevent rod bending over the 360 mm extension.
Replacing the Airtac SU32~50 Standard Cylinder SU32X360 with the SAU32X360
To replace the SU32X360, order the SAU32X360, confirming the 32 mm bore, 360 mm stroke, 1/8 inch port, and M10x1.25 rod thread. Reuse your existing SC-series mounting brackets. Since this is a non-magnet model, it cannot accept a sensor; if position detection is required, order an SAU with the -S option and use CMSG/DMSG/EMSG switches instead of the legacy CS1-B/DS1-B. If you need integrated flow control, explore the SAUF variant. For loads exceeding the 402 N push at 0.5 MPa, step up to a 40 mm bore. With a 360 mm stroke, prevent rod bending by guiding the load externally. Finally, standard cushions only decelerate; for load holding on air loss, install an external rod lock or pilot-operated check valve.
Replacement checklist
- ✓ Same bore / stroke → SAU32X360
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU32X360 FAQ
Yes, the SU32X360 is discontinued. The direct replacement is the AirTAC SAU32X360. It matches the 32 mm bore, 360 mm stroke, 402 N force at 0.5 MPa, 1/8 inch port, and SC-series mounting, so it fits the same application without mechanical changes.
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a theoretical max of 82 kgf at 1.0 MPa. This specific non-magnet SKU cannot accept a sensor; the SAU replacement with the -S option uses CMSG/DMSG/EMSG switches, replacing the legacy CS1-B/DS1-B.
Request a Quote for the SAU32X360
Send us the quantity and destination. We confirm price, stock and lead time on the SAU32X360 replacement — usually within 7-8 hours.