This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU80X130, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X130
The AirTAC Airtac SU63-100 Standard Cylinder SU80X130 is a double-acting profile-type standard cylinder with a Ø80mm bore and 130mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU80X130, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke130 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU80X130
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU80X130
The AirTAC SU80X130 is a discontinued double-acting profile-type cylinder with an 80 mm bore and 130 mm stroke. Delivering 2513 N push force at 0.5 MPa, it uses an extruded aluminum barrel and adjustable air cushions to stay more compact than an ISO 15552 cylinder of the same bore. AirTAC replaced this unit with the SAU80X130, a direct replacement retaining the exact 3/8" port, M20x1.5 rod thread, and SC-series mounting.
Upgrading to the SAU80X130 keeps your 2513 N thrust and 513 kgf maximum capacity intact. Because this specific SU SKU lacks a magnet, it cannot accept a sensor. If you previously used CS1-B or DS1-B switches on other SU units, note the SAU family upgrades to CMSG/DMSG/EMSG sensors, and the SAUF variant adds a built-in valve the SU line never had.
Airtac SU63-100 Standard Cylinder SU80X130 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU80X130 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU80X130 |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU80X130 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAU80X130 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU80X130
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU80X130 Is Used
Press Fit Assembly
Drives bearings or pins into housings using its 2513 N thrust at 0.5 MPa, with the compact profile saving valuable machine footprint.
Pallet Diverting
Pushes heavy pallets off a main conveyor line; the adjustable 28 mm cushions absorb the kinetic energy of the moving load at stroke end.
Carton Flap Folding
Folds large packaging flaps prior to sealing, utilizing the 80 mm bore's robust pull force of 2268 N to retract the mechanism reliably.
Replacing the Airtac SU63-100 Standard Cylinder SU80X130 with the SAU80X130
To replace the SU80X130, order the SAU80X130. Verify your 3/8" port, M20x1.5 rod thread, PT/G/NPT thread standard, and SC-series mounting (LB/FA/FB/CA/CB) are compatible. This non-magnetic SKU cannot accept a sensor; if your application requires position detection, select an SAU model with a magnet and use current CMSG/DMSG/EMSG switches instead of the legacy CS1-B/DS1-B. Sizing both ways: a neighboring 63 mm bore yields 1559 N push at 0.5 MPa, while a 100 mm bore yields 3927 N. For load holding, note that a plain cylinder drifts on air loss—the cushion only decelerates—so add an external rod lock or pilot-operated check valve for suspended loads. The 130 mm stroke is under the 300 mm threshold, so rod-bending side-load risks are minimal, but always guide the load rigidly.
Replacement checklist
- ✓ Same bore / stroke → SAU80X130
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU80X130 FAQ
Yes, the AirTAC SU80X130 is discontinued. The direct replacement is the SAU80X130. It matches the 80 mm bore, 130 mm stroke, 2513 N output force, 3/8" port, and SC-series mounting accessories, so it fits the same application directly.
The 80 mm bore provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a 513 kgf maximum at 1.0 MPa. Because this specific SKU lacks a -S magnet, it cannot accept a sensor; legacy SU sensors were CS1-B/DS1-B, while the SAU replacement uses CMSG/DMSG/EMSG switches.
Request a Quote for the SAU80X130
Send us the quantity and destination. We confirm price, stock and lead time on the SAU80X130 replacement — usually within 7-8 hours.