This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU80X1300, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X1300
The AirTAC SU63-100 Standard Cylinder SU80X1300 is a double-acting profile-type standard cylinder with a Ø80mm bore and 1300mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU80X1300, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke1300 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU80X1300
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU80X1300
The AirTAC SU80X1300 is a discontinued double-acting profile-type cylinder with an 80mm bore and 1300mm stroke. It delivers 2513N push and 2268N pull at 0.5MPa, utilizing a 3/8" port and M20x1.5 rod thread. AirTAC replaced this end-of-life unit with the SAU80X1300, a direct upgrade retaining the exact bore, stroke, force, port size, and SC-series mounting footprint.
The SAU replacement modernizes sensing by adopting CMSG/DMSG/EMSG switches instead of the legacy CS1-B/DS1-B units, and introduces the SAUF built-in 4M solenoid valve variant. Since this specific SKU lacks a magnet, it cannot accept any sensor. Remember that standard air cushions only decelerate the piston near stroke ends; they do not hold loads on air loss.
Airtac SU63-100 Standard Cylinder SU80X1300 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU80X1300 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU80X1300 |
| Bore size | Ø80 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU80X1300 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAU80X1300 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU80X1300
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU80X1300 Is Used
Long-Stroke Material Transfer
Pushes heavy pallets along a 1300mm conveyor section using 2513N of thrust at 0.5MPa, requiring external guides to prevent rod bending over the extended travel.
Large Assembly Line Indexing
Shifts heavy fabrication jigs between stations, utilizing the 80mm bore's 28mm adjustable air cushions at both ends to decelerate the mass smoothly.
Replacing the Airtac SU63-100 Standard Cylinder SU80X1300 with the SAU80X1300
To replace the discontinued SU80X1300, order the SAU80X1300 direct equivalent, verifying your 3/8" port, M20x1.5 thread, and SC-series mounting hardware. Because this SKU has no magnet (-S), it cannot support sensing; if you need position detection, specify an SAU80X1300-S and upgrade to CMSG/DMSG/EMSG switches. If your application requires integrated flow control, consider the SAUF valve-integrated variant. For loads needing 3518N push at 0.7MPa, this 80mm bore is correct, but if you need less force, a 63mm bore offers 1559N. At 1300mm stroke, prevent rod bending by guiding the load externally to avoid side-load damage. Finally, a plain cylinder drifts without live air—install an external rod lock or pilot-operated check valve for secure load holding.
Replacement checklist
- ✓ Same bore / stroke → SAU80X1300
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU80X1300 FAQ
Yes, the SU80X1300 is discontinued. The direct replacement is the AirTAC SAU80X1300, which matches the 80mm bore, 1300mm stroke, 3/8" port, and SC-series mounting. The SAU body is identical, but it uses modern CMSG/DMSG/EMSG sensors and offers an optional SAUF built-in valve.
This 80mm bore cylinder delivers 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, and a maximum theoretical force of 513kgf at 1.0MPa. Because this specific SKU lacks a magnet, it cannot accept magnetic switches; order an -S version if position sensing is required.
Related AirTAC SAU Cylinders
Request a Quote for the SAU80X1300
Send us the quantity and destination. We confirm price, stock and lead time on the SAU80X1300 replacement — usually within 7-8 hours.