This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU80X250, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X250
The AirTAC Airtac SU63-100 Standard Cylinder SU80X250 is a double-acting profile-type standard cylinder with a Ø80mm bore and 250mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU80X250, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke250 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU80X250
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU80X250
The AirTAC SU80X250 is a discontinued double-acting profile-type cylinder with an 80mm bore and 250mm stroke. It delivers 2513N push and 2268N pull at 0.5MPa, using a 25mm rod and 3/8" port. AirTAC replaced this unit with the SAU80X250, a direct alternative retaining the exact body dimensions, force, and SC-series mounting.
The SAU upgrade introduces CMSG/DMSG/EMSG sensors (replacing the legacy CS1-B/DS1-B) and adds the SAUF built-in-valve option the SU lacked. Since this specific SKU has no magnet, it cannot accept a sensor.
Airtac SU63-100 Standard Cylinder SU80X250 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU80X250 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU80X250 |
| Bore size | Ø80 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU80X250 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAU80X250 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU80X250
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU80X250 Is Used
Press Fit Assembly
Drives bearings into housings with 2513N push at 0.5MPa, utilizing the adjustable 28mm cushions to prevent impact damage at the 250mm stroke end.
Pallet Diverting
Pushes heavy pallets off a main conveyor line, safely handling a 1508N working load while reusing existing AirTAC SC-series mounting brackets.
Replacing the Airtac SU63-100 Standard Cylinder SU80X250 with the SAU80X250
To replace this discontinued SU80X250, order the SAU80X250 direct equivalent, matching the 80mm bore, 250mm stroke, 3/8" port, and M20x1.5 rod thread. Because this SKU lacks a magnet (-S), it cannot support sensing; if you need position detection, specify an SAU80X250S and migrate to CMSG/DMSG/EMSG switches. For loads needing 3518N at 0.7MPa, step up to a 100mm bore; if 1767N suffices, step down to a 50mm bore. A plain cylinder drifts on air loss—the 28mm cushions only decelerate—so use an external rod lock or pilot-operated check valve for holding. At 250mm stroke, ensure guide alignment to prevent rod bending. The SAUF variant integrates a 4M valve if compact actuation is needed.
Replacement checklist
- ✓ Same bore / stroke → SAU80X250
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU80X250 FAQ
Yes, the AirTAC SU80X250 is discontinued. The direct replacement is the SAU80X250. It shares the same 80mm bore, 250mm stroke, 3/8" port, output force, and SC-series mounting, so it fits the same application without mechanical modifications.
It delivers 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, and a 513kgf maximum at 1.0MPa. This specific no-magnet SKU cannot accept sensors; the SAU replacement uses CMSG/DMSG/EMSG switches, but you must order the -S version for detection.
Request a Quote for the SAU80X250
Send us the quantity and destination. We confirm price, stock and lead time on the SAU80X250 replacement — usually within 7-8 hours.