This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU80X360, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X360
The AirTAC Airtac SU63-100 Standard Cylinder SU80X360 is a double-acting profile-type standard cylinder with a Ø80mm bore and 360mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU80X360, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke360 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU80X360
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU80X360
The AirTAC SU80X360 is a discontinued double-acting profile-type cylinder with an 80mm bore and 360mm stroke, delivering a 2513 N push force at 0.5 MPa. AirTAC replaced this end-of-line unit with the SAU80X360, a direct alternative retaining the exact bore, stroke, output force, 3/8 inch port, and SC-series mounting form. Because it uses an extruded aluminum barrel, the body is more compact than an ISO 15552 cylinder of the same size.
This non-magnet SKU cannot accept a sensor, whereas upgrading to the SAU lets you use modern CMSG/DMSG/EMSG switches (the SU line relied on legacy CS1-B/DS1-B). The SAU family also introduces the SAUF variant with a built-in 4M solenoid valve, a self-switching option the SU never offered.
Airtac SU63-100 Standard Cylinder SU80X360 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU80X360 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU80X360 |
| Bore size | Ø80 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU80X360 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAU80X360 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU80X360
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU80X360 Is Used
Pallet Diversion
Pushes heavy pallets laterally across transfer lines using 2513 N of thrust at 0.5 MPa, with the 360mm stroke clearing wide conveyor frames.
Press Ejection
Ejects dense molded parts from press beds, relying on the 28mm adjustable air cushions to decelerate the 25mm rod smoothly at stroke end.
Replacing the Airtac SU63-100 Standard Cylinder SU80X360 with the SAU80X360
To replace the discontinued SU80X360, order the SAU80X360 direct equivalent, verifying your 3/8 inch port threads (PT, G, or NPT) and SC-series mounting hardware. If you need position sensing, note this specific non-magnet SU SKU cannot take a switch; the SAU upgrade requires CMSG/DMSG/EMSG sensors instead of the old CS1-B/DS1-B. If downward sizing is possible, a 63mm bore yields 1559 N push at 0.5 MPa, while an 100mm bore provides 3927 N. Because the 360mm stroke is fairly long, prevent rod bending by guiding the load externally to avoid side-load forces. A plain cylinder drifts on air loss—the cushions only decelerate—so install an external rod lock or pilot-operated check valve for secure load holding.
Replacement checklist
- ✓ Same bore / stroke → SAU80X360
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU80X360 FAQ
Yes, the SU80X360 is discontinued. The direct replacement is the AirTAC SAU80X360, which matches the 80mm bore, 360mm stroke, force, 3/8 inch port, and SC-series mounting accessories.
At 0.5 MPa it pushes 2513 N and pulls 2268 N; at 0.7 MPa it pushes 3518 N, with a theoretical max of 513 kgf at 1.0 MPa. This specific non-magnet SKU cannot accept a sensor, but the SAU replacement supports CMSG/DMSG/EMSG switches.
Request a Quote for the SAU80X360
Send us the quantity and destination. We confirm price, stock and lead time on the SAU80X360 replacement — usually within 7-8 hours.