This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X150-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X150-10
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X150-10 is a double-acting profile-type standard cylinder with a Ø100mm bore and 150mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X150-10, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke150 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X150-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X150-10
The AirTAC SUJ100X150-10 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 140-150 mm stroke from the 150 mm nominal maximum. The 1/2" port and M20x1.5 rod thread handle high flow, while adjustable 29 mm cushions absorb end-of-stroke energy.
This SUJ series is discontinued; the direct replacement is the SAUJ100X150-10, matching the bore, stroke, 1/2" port, force, and FA/LB mounting. The upgrade path moves sensing from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG sensors, though this specific non-magnet SKU cannot accept a switch. Remember the stop screw sets end position only—it is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X150-10 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X150-10 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X150-10 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X150-10 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X150-10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X150-10
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X150-10 Is Used
Press Fit Tuning
Final press insertion depth needs exacting 0-10 mm field adjustment to compensate for material variance without disassembling the fixture.
Diverter Gate Stops
Adjusting the extend endpoint on-site to set the exact gap for varying package widths on a sorting line.
Pallet Positioning
Trimming the extend stroke by up to 10 mm to dial in the precise push-off distance for pallet transfer stations.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X150-10 with the SAUJ100X150-10
To replace the discontinued SUJ100X150-10, order the SAUJ100X150-10 direct: it preserves the 100 mm bore, 150 mm stroke, 1/2" port, and FA/LB mounting. The 10 mm adjust window is ideal for fine-tuning the extend endpoint without machining spacers; if you need a wider trim, select a larger adjust suffix. Because this is a non-magnet SKU, it cannot accept a switch; if you need position feedback, select the -S version (using CMSG/DMSG/EMSG sensors on the SAUJ). For strokes of 300 mm or longer, verify side-load limits to prevent guide bushing wear. Mounting accessories are compatible with the AirTAC SC series only.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X150-10
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X150-10 FAQ
Yes, the AirTAC SUJ100X150-10 is discontinued. The direct replacement is the SAUJ100X150-10, which shares the same 100 mm bore, 150 mm stroke, 1/2" port, and FA/LB mounting. The SAUJ also supports the current CMSG/DMSG/EMSG sensors and the SAUF built-in-valve variant.
The double-acting double-rod SUJ100X150-10 has a 10 mm adjust window (usable extend stroke 140-150 mm). The stop screw sets end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X150-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X150-10 replacement — usually within 7-8 hours.