This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ100X200-75S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ100X200-75S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X200-75S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X200-75S is a double-acting profile-type standard cylinder with a Ø100mm bore and 200mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ100X200-75S, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke200 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X200-75S
About the Airtac SUJ Adjustable Cylinder SUJ100X200-75S
The AirTAC SUJ100X200-75S is a double-acting, single-rod adjustable-stroke profile cylinder. An external stop screw lets you trim the extend stroke by up to 75 mm on-site, yielding a usable 125-200 mm extend out of the 200 mm nominal maximum. This 100 mm bore delivers 3927 N push and 3681 N pull at 0.5 MPa, peaking at 7068 N push at 0.9 MPa. It features a 1/2 inch port, a 25 mm rod, and 29 mm adjustable cushions.
This SUJ unit is discontinued; the exact drop-in replacement is the SAUJ100X200-75S, retaining the same bore, stroke, force, and FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors, whereas this -S model uses legacy CS1-B/DS1-B switches. For sizing, a safe working load is roughly 2356 N (60% of the 0.5 MPa push), translating to a 200 kg vertical lift with a 2:1 margin. The stop screw sets end position only; it is not a load lock, so add an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X200-75S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X200-75S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X200-75S |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X200-75S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X200-75S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X200-75S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X200-75S Is Used
Variable Depth Boring
Trimming the 200 mm extend stroke by up to 75 mm on-site allows precise depth control for boring heads without swapping cylinders.
Adjustable Diverter Arms
Field-tuning the extend end position lets a diverter accommodate changing package widths on a packaging line.
Variable Height Stops
Shortening the extend stroke by up to 75 mm creates adjustable physical stops for pallets of varying heights.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X200-75S with the SAUJ100X200-75S
To replace this discontinued SUJ100X200-75S, specify the drop-in SAUJ100X200-75S, which preserves the 100 mm bore, 200 mm stroke, 75 mm adjust window, 1/2 inch port, and FA/LB mounting. When sizing both ways, the neighboring 80 mm bore yields 2513 N push at 0.5 MPa, while the 100 mm bore provides 3927 N at 0.5 MPa. Choose the 75 mm adjust window if you need on-site extend trimming between 125 and 200 mm; the stop screw sets end position but is not a lock, so integrate an external rod lock for holding loads without live air. Because this -S model uses legacy CS1-B/DS1-B switches, upgrade to CMSG/DMSG/EMSG sensors for the SAUJ. For strokes of 300 mm or longer, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X200-75S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X200-75S FAQ
Yes, the SUJ100X200-75S is discontinued. The exact drop-in replacement is the SAUJ100X200-75S, which matches the 100 mm bore, 200 mm stroke, 75 mm adjust window, 1/2 inch port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The 100 mm bore provides 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and 7068 N push at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw window is 75 mm, allowing you to trim the 200 mm extend stroke down to 125 mm on-site.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X200-75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X200-75S replacement — usually within 7-8 hours.