This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ100X225-100 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ100X225-100 in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X225-100
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X225-100 is a double-acting profile-type standard cylinder with a Ø100mm bore and 225mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ100X225-100, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke225 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X225-100
About the Airtac SUJ Adjustable Cylinder SUJ100X225-100
The AirTAC SUJ100X225-100 is a double-acting single-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 100 mm on-site, yielding a usable 125-225 mm window. Because this SUJ model is discontinued, the exact drop-in replacement is the SAUJ100X225-100, matching the 100 mm bore, 225 mm maximum stroke, 1/2" port, and SC-series FA/LB mounting. The stop screw sets the end position but is not a load lock; use an external rod lock for held loads.
At 0.5 MPa this 100 mm bore generates 3927 N push and 3681 N pull, peaking at 7068 N push at 0.9 MPa. A practical computed insight sets the safe working load around 2356 N (60% of the 0.5 MPa push), translating to a 200 kg vertical lift with a 2:1 margin. This non-magnet SKU cannot take a sensor, and upgrading to the SAUJ moves legacy CS1-B/DS1-B switches to current CMSG/DMSG/EMSG sensors.
Airtac SUJ Adjustable Cylinder SUJ100X225-100 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X225-100 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X225-100 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X225-100 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X225-100 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X225-100
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X225-100 Is Used
Variable Pitch Indexing
Trimming the extend stroke by up to 100 mm on-site allows a single 225 mm cylinder to drive multiple product pitches without mechanical rebuilds.
Adjustable Transfer Pusher
Dial in the pusher end position between 125 mm and 225 mm to handle varying package sizes on a shared line while maintaining 3927 N of push force.
Custom End-Stop Forming
Use the external stop screw to set precise mechanical end positions for pressing or forming tasks, providing a hard physical limit independent of pneumatic pressure.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X225-100 with the SAUJ100X225-100
To replace the discontinued SUJ100X225-100, order the drop-in SAUJ100X225-100, which preserves the 100 mm bore, 225 mm stroke, 1/2" port, and FA/LB mounts. When sizing both ways, the neighbouring 80 mm bore provides 2513 N push at 0.5 MPa, while the 100 mm bore offers 3927 N at 0.5 MPa and 5497 N at 0.7 MPa. Choose the 100 mm adjust window if your fixture requires trimming the extend stroke by up to 100 mm on-site. This non-magnet version cannot accept sensors; if you need position detection, select an SAUJ with the -S suffix and use current CMSG/DMSG/EMSG switches. For strokes at or above 300 mm, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X225-100
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X225-100 FAQ
Yes, the SUJ100X225-100 is discontinued. The exact drop-in replacement is the SAUJ100X225-100, which matches the 100 mm bore, 225 mm stroke, 1/2" port, and FA/LB mounting. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The 100 mm bore delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw provides a 100 mm adjust window, allowing you to shorten the 225 mm extend stroke down to 125 mm on-site. The stop sets end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X225-100
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X225-100 replacement — usually within 7-8 hours.