This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X350-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X350-30
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X350-30 is a double-acting profile-type standard cylinder with a Ø100mm bore and 350mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X350-30, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke350 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X350-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X350-30
The AirTAC SUJ100X350-30 is a discontinued double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30 mm on-site, giving a usable extend window of 320-350 mm. The nominal 350 mm stroke is the maximum. The 1/2" port, M20x1.5 rod thread, and 29 mm adjustable cushions handle heavy dynamics.
The direct replacement is the SAUJ100X350-30, retaining the same bore, stroke, force, and FA/LB mounting. Upgrading to the SAUJ moves you to current CMSG/DMSG/EMSG sensors, as this legacy model used CS1-B/DS1-B. The stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X350-30 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X350-30 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X350-30 |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X350-30 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X350-30 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X350-30
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X350-30 Is Used
Press Fit Tuning
Allows operators to dial in the exact 320-350 mm extend position for pressing bearings without machining hard stops.
Variable Length Diverter
Adjusts the extend stroke on-site to deflect different package sizes on a heavy transfer line.
Pallet Positioning Stop
Sets a precise physical end position for pallets, with the 30 mm window accommodating various pallet heights.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X350-30 with the SAUJ100X350-30
To replace the discontinued SUJ100X350-30, swap directly to the SAUJ100X350-30 for identical 100 mm bore, 350 mm stroke, 30 mm adjust window, and 1/2" port. Choose the 30 mm adjust window if your end-of-stroke target varies by up to 30 mm. Use FA or LB mounting (SC-series compatible). This non-magnetic SKU cannot take a switch; the SAUJ uses CMSG/DMSG/EMSG sensors. At 350 mm stroke, support side loads with external guides to prevent rod bending.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X350-30
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X350-30 FAQ
Yes, the SUJ100X350-30 is discontinued. The direct replacement is the SAUJ100X350-30, which shares the same 100 mm bore, 350 mm stroke, 30 mm adjust window, 1/2" port, and FA/LB mounting. The SAUJ upgrades sensing to current CMSG/DMSG/EMSG sensors.
The double-acting double-rod cylinder pushes 3927 N and pulls 3681 N at 0.5 MPa, pushing 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The external stop screw trims the extend stroke by up to 30 mm on-site (usable 320-350 mm). The stop sets end position only; it is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X350-30
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X350-30 replacement — usually within 7-8 hours.