This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X450-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X450-10
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X450-10 is a double-acting profile-type standard cylinder with a Ø100mm bore and 450mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X450-10, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke450 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X450-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X450-10
The AirTAC SUJ100X450-10 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, giving a usable 440-450 mm extension out of the 450 mm nominal maximum. As a discontinued model, it is superseded by the direct replacement SAUJ100X450-10, which matches the 100 mm bore, 1/2" port, M20x1.5 rod thread, and FA/LB mounting. The stop screw sets the end position but is not a load lock.
The SAUJ upgrade retains these forces while moving to current CMSG/DMSG/EMSG sensors, replacing the legacy CS1-B/DS1-B switches used on the SUJ. Because this SKU lacks a magnet, it cannot take a magnetic switch. Note that a plain cylinder drifts on air loss; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X450-10 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X450-10 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X450-10 |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X450-10 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X450-10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X450-10
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X450-10 Is Used
Press Fit Tuning
Trimming the extend stroke by up to 10 mm on-site allows precise bottoming force for pressing bearings without machining hard stops.
Divertor Positioning
Field-tuning the 440-450 mm stroke lets operators dial in the exact actuator reach for moving varied package sizes on a packaging line.
Pallet Stop Adjustment
The external stop screw provides a quick way to adjust the end position for different pallet depths without reprogramming the motion controller.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X450-10 with the SAUJ100X450-10
To replace the discontinued SUJ100X450-10, order the direct replacement SAUJ100X450-10, ensuring you migrate from legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches (this non-magnetic SKU cannot take a switch anyway). The 10 mm adjust window is ideal for fine-tuning the 440-450 mm extend endpoint, which beats adding a fixed SAU plus an external stop. Utilize FA or LB mounting (SC-series compatible). For the 450 mm stroke, support the rod against bending and use external guides to manage side loads. The stop screw sets end position, not a lock; add a pilot-operated check valve or external rod lock for load holding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X450-10
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X450-10 FAQ
Yes, the SUJ100X450-10 is discontinued. The direct replacement is the SAUJ100X450-10, which shares the same 100 mm bore, 450 mm stroke, 1/2" port, and FA/LB mounting. You must upgrade the legacy CS1-B/DS1-B sensors to the current CMSG/DMSG/EMSG switches.
The 10 mm adjust window shortens the extend stroke on-site from the 450 mm maximum down to 440 mm. The 1/2" port cylinder operates at 30-800 mm/s.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X450-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X450-10 replacement — usually within 7-8 hours.