This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X75-75, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X75-75
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X75-75 is a double-acting profile-type standard cylinder with a Ø100mm bore and 75mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X75-75, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke75 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X75-75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X75-75
The AirTAC SUJ100X75-75 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 75 mm on-site. The nominal 75 mm stroke is the maximum, yielding a usable extend window of 0-75 mm. The stop screw sets the end position; it is not a load lock, so use an external rod lock for held loads.
This SKU has no magnet (-S omitted) and cannot take a magnetic switch. The direct replacement is the SAUJ100X75-75, which retains the exact bore, stroke, force, port, and FA/LB mounting. The SAUJ upgrade uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
Airtac SUJ Adjustable Cylinder SUJ100X75-75 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X75-75 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X75-75 |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X75-75 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X75-75 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X75-75
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X75-75 Is Used
Variable Stroke Pressing
Allows operators to dial in the exact 0-75 mm extend position for pressing bearings without machining custom spacers.
Adjustable Diverter Arm
Tunes the extend reach on a sorting line to handle changing package widths on the fly via the stop screw.
Custom End-Stop Ejection
Sets a precise ejection point for parts of varying lengths, using the full 75 mm trim window to adapt the stroke.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X75-75 with the SAUJ100X75-75
To replace the discontinued SUJ100X75-75, order the SAUJ100X75-75 direct. It keeps the 1/2" port, M20x1.5 rod, 29 mm cushions, and FA/LB mounts. Choose the 75 mm adjust window when you need field-tuning flexibility that beats a fixed SAU plus external stop. This non-magnetic SKU cannot take sensors; if you need position detection, select the SAUJ-S variant and use CMSG/DMSG/EMSG switches. For strokes of 300 mm or longer, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X75-75
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X75-75 FAQ
Yes, the SUJ100X75-75 is discontinued. The direct replacement is the SAUJ100X75-75, which matches the 100 mm bore, 75 mm stroke, 1/2" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
The external stop screw window is 75 mm, letting you shorten the extend stroke from the 75 mm maximum down to 0 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X75-75
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X75-75 replacement — usually within 7-8 hours.