This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X75-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X75-75S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X75-75S is a double-acting profile-type standard cylinder with a Ø100mm bore and 75mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X75-75S, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke75 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X75-75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X75-75S
The AirTAC SUJ100X75-75S is a double-acting, double-rod profile cylinder with an on-site stroke-trim window. An external stop screw shortens the extend stroke by up to 75 mm, giving a usable extend range of 0-75 mm from the 75 mm nominal maximum. The 1/2" port and M20x1.5 rod thread handle high flow, while the 29 mm adjustable air cushions decelerate heavy loads smoothly.
This discontinued SUJ model is replaced direct by the SAUJ100X75-75S, retaining the exact bore, stroke, force, port, and FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors, whereas this unit uses legacy CS1-B/DS1-B switches (indicated by the -S suffix). Note the stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X75-75S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X75-75S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X75-75S |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X75-75S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X75-75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X75-75S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X75-75S Is Used
Press Fit Tuning
Adjust the extend stroke by up to 75 mm on-site to dial in exact press-fit depths for bearings without swapping mechanical spacers.
Variable Length Diverter
Field-tune the actuator endpoint to accommodate changing package sizes on a sorting line, using the full 0-75 mm trim window.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X75-75S with the SAUJ100X75-75S
To replace the SUJ100X75-75S, order the direct replacement SAUJ100X75-75S, which matches the 100 mm bore, 75 mm stroke, 1/2" port, and FA/LB mounting. The -S magnet suffix means you must upgrade position sensing from the legacy CS1-B/DS1-B to the current CMSG/DMSG/EMSG switches. The 75 mm adjust window is ideal when exact extend endpoints must be tuned on-site without machining spacers. For stroke lengths of 300 mm or more, verify side-load limits to prevent rod binding. Remember the stop screw sets position only and does not hold loads on air loss; add an external rod lock for vertical holding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X75-75S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X75-75S FAQ
Yes, the SUJ100X75-75S is discontinued. The direct replacement is the SAUJ100X75-75S, which shares the same 100 mm bore, 75 mm stroke, 1/2" port, and FA/LB mounting. You will only need to upgrade the position sensors from the legacy CS1-B/DS1-B to the current CMSG/DMSG/EMSG switches.
The external stop screw shortens the extend stroke by up to 75 mm on-site, yielding a usable extend range of 0-75 mm. The stop sets end position only and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X75-75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X75-75S replacement — usually within 7-8 hours.