This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X80-100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X80-100
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X80-100 is a double-acting profile-type standard cylinder with a Ø100mm bore and 80mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X80-100, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke80 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X80-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X80-100
The AirTAC SUJ100X80-100 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 100 mm on-site. With a nominal 80 mm stroke, the usable extend range is 0-80 mm. It features a 1/2" port, a 25 mm rod, and 29 mm adjustable cushions.
The direct replacement is the SAUJ100X80-100, matching the bore, stroke, force, port, and FA/LB mounting. Upgrading to the SAUJ moves you to current CMSG/DMSG/EMSG sensors, departing from the legacy CS1-B/DS1-B switches. Note this non-magnet SKU cannot take a switch, and the stop screw sets end position but is not a load lock.
Airtac SUJ Adjustable Cylinder SUJ100X80-100 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X80-100 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X80-100 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X80-100 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X80-100 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X80-100
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X80-100 Is Used
Variable Stroke Pressing
Dialing the extend stroke on-site for pressing operations where material thickness varies, using the 100 mm adjust window to set a precise end position without swapping cylinders.
Adjustable Transfer Diverter
Tuning a diverter arm on a conveyor line to accommodate different package sizes, trimming the extend stroke by up to 100 mm to hit the exact routing angle needed.
Custom End-Stop Positioning
Setting a specific physical end-stop for a pallet handling gate when machine layouts change, relying on the external screw rather than adding hard stops.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X80-100 with the SAUJ100X80-100
To replace the discontinued SUJ100X80-100, order the SAUJ100X80-100; it is a direct for the 100 mm bore, 80 mm stroke, 1/2" port, and FA/LB mounts. The 100 mm adjust window lets you dial the extend stroke down to zero, which is ideal when a fixed SAU plus external stop would waste space. Because this SKU lacks a magnet, it cannot take a sensor; the SAUJ upgrade requires CMSG/DMSG/EMSG switches instead of the old CS1-B/DS1-B. For strokes at or over 300 mm, verify side-load limits to prevent guide wear. The stop screw sets end position only; for load holding on air loss, add an external rod lock or pilot-operated check valve.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X80-100
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X80-100 FAQ
Yes, the SUJ100X80-100 is discontinued. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
The external stop screw window is 100 mm, allowing you to trim the 80 mm nominal extend stroke down to 0 mm on-site. The stop sets end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X80-100
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X80-100 replacement — usually within 7-8 hours.