This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X150-100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X150-100
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X150-100 is a double-acting profile-type standard cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X150-100, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X150-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X150-100
The AirTAC SUJ32X150-100 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 100mm on-site, yielding a usable 50-150mm stroke from the 150mm nominal maximum. This discontinued model is replaced direct by the SAUJ32X150-100, sharing the exact bore, force, port, and FA/LB mounting.
Because the stop screw sets end position, it is not a load lock; use an external rod lock for held loads. The compact profile body is shorter than an ISO 15552 cylinder of the same bore. The SAUJ upgrade switches legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches.
Airtac SUJ Adjustable Cylinder SUJ32X150-100 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X150-100 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X150-100 |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X150-100 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X150-100 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X150-100
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X150-100 Is Used
Custom Clamp Positioning
Trimming the extend stroke by up to 100mm on-site allows operators to dial in the exact clamping depth for varying workpiece heights without swapping cylinders.
Variable Length Diverter
A diverter arm can be retracted or extended within the 50-150mm usable range to accommodate different package sizes moving down a packaging line.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X150-100 with the SAUJ32X150-100
To replace the discontinued SUJ32X150-100, order the direct replacement SAUJ32X150-100, which keeps the 32mm bore, 150mm nominal stroke, 100mm adjust window, 1/8" port, and FA/LB mounting. When choosing the adjust window, remember the external stop screw trims the extend stroke by up to 100mm on-site but does not lock the load. This non-magnetic SKU cannot take a sensor, but if upgrading to an -S SAUJ, migrate from CS1-B/DS1-B to CMSG/DMSG/EMSG sensors. For strokes of 300mm or longer, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X150-100
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X150-100 FAQ
Yes, the SUJ32X150-100 is discontinued. The direct replacement is the SAUJ32X150-100, which matches the 32mm bore, 150mm stroke, 100mm adjust window, 1/8" port, and FA/LB mounting. The SAUJ also supports the SAUF built-in-valve variant and uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
The external stop screw window is 100mm, meaning you can shorten the 150mm nominal extend stroke down to 50mm on-site. The stop sets end position only and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X150-100
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X150-100 replacement — usually within 7-8 hours.