This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X150-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X150-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X150-10S is a double-acting profile-type standard cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X150-10S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X150-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X150-10S
The AirTAC SUJ32X150-10S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 140-150 mm extension out of the 150 mm nominal maximum. This discontinued model is fully replaced by the direct replacement SAUJ32X150-10S, which retains the exact bore, stroke, force, and SC-series FA/LB mounting compatibility.
The SAUJ upgrade adopts current CMSG/DMSG/EMSG sensors instead of this unit's legacy CS1-B/DS1-B switches. Remember the stop screw sets the end position but is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X150-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X150-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X150-10S |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X150-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X150-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X150-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X150-10S Is Used
Gripper Jaw Actuation
Trimming the extend stroke by up to 10 mm on-site allows precise gripping of varying part widths without machining custom spacers.
Package Diverter Stops
Field-tuning the 140-150 mm extend endpoint lets operators adjust the diverter gate position quickly for different carton sizes.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X150-10S with the SAUJ32X150-10S
To replace the discontinued SUJ32X150-10S, order the exact direct replacement SAUJ32X150-10S, which preserves the 32 mm bore, 150 mm stroke, 10 mm adjust window, 1/8" port, and FA/LB mounting. Choose the 10 mm adjust window when you need minor field tuning of the extend end position. Because this unit has the -S magnet, you must upgrade your legacy CS1-B/DS1-B switches to current CMSG/DMSG/EMSG sensors. For this 150 mm stroke, side-load alignment is manageable, but for any stroke >=300 mm, carefully support the rod to prevent binding. The stop screw decelerates the piston near the end of travel; it does not hold the load on air loss, so add a pilot-operated check valve or external rod lock for vertical loads.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X150-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X150-10S FAQ
Yes, the SUJ32X150-10S is discontinued. The direct replacement is the SAUJ32X150-10S, which matches the 32 mm bore, 150 mm stroke, 10 mm adjust window, 1/8" port, and FA/LB mounting. You must upgrade the legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches.
The external stop screw allows you to shorten the extend stroke by up to 10 mm on-site, giving a usable extension range of 140-150 mm.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X150-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X150-10S replacement — usually within 7-8 hours.