This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X160-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X160-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X160-10S is a double-acting profile-type standard cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X160-10S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X160-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X160-10S
The AirTAC SUJ32X160-10S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 150-160 mm extension. The nominal 160 mm stroke represents the maximum travel. This discontinued model is fully replaced by the direct replacement SAUJ32X160-10S, which matches the bore, stroke, force, and mounting.
The stop screw sets the end position but is not a load lock; a plain cylinder drifts on air loss, so use an external rod lock for held loads. The SAUJ successor adopts current CMSG/DMSG/EMSG sensors, whereas this SUJ used legacy CS1-B/DS1-B switches. The compact profile barrel is shorter than an ISO 15552 cylinder of the same bore.
Airtac SUJ Adjustable Cylinder SUJ32X160-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X160-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X160-10S |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X160-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X160-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X160-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X160-10S Is Used
Diverter Gate Trimming
Fine-tune the 10 mm extend stop on a sorting line diverter to accommodate varying package sizes without reprogramming the PLC.
Inline Stopper Adjustment
Set the precise end position for a pneumatic stop gate on a conveyor, allowing rapid mechanical adjustment for product changeovers.
Light Clamping Setup
Dial in the clamping stroke on a 20 kg workholding fixture where the exact part thickness varies slightly between batches.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X160-10S with the SAUJ32X160-10S
To replace the discontinued SUJ32X160-10S, order the direct replacement SAUJ32X160-10S, which preserves the 32 mm bore, 160 mm stroke, 1/8" port, and SC-series FA/LB mounting. The 10 mm adjust window allows precise end-position tuning without shims, but remember the stop is not a lock. Because this unit has an -S magnet, you must upgrade from legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches on the SAUJ. For this 160 mm stroke, side-load is minimal, but for strokes >=300 mm ensure guide alignment to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X160-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X160-10S FAQ
Yes, the SUJ32X160-10S is discontinued. The direct replacement is the AirTAC SAUJ32X160-10S, which matches the 32 mm bore, 160 mm stroke, 1/8" port, and FA/LB mounting. You will need to upgrade the position sensors from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG switches.
The external stop screw provides a 10 mm adjustment window, allowing you to shorten the 160 mm extend stroke down to 150 mm on-site.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X160-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X160-10S replacement — usually within 7-8 hours.