This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X200-100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X200-100
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X200-100 is a double-acting profile-type standard cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X200-100, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X200-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X200-100
The AirTAC SUJ32X200-100 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 100 mm on-site, giving a usable 100-200 mm end position from the 200 mm nominal maximum. The stop sets the end position but is not a load lock; use an external rod lock to hold loads.
The direct replacement is the SAUJ32X200-100, retaining the exact bore, stroke, force, port, and FA/LB mounting. Upgrading to the SAUJ moves you to current CMSG/DMSG/EMSG sensors from the legacy CS1-B/DS1-B, and the SAU line adds an SAUF built-in-valve variant. This compact profile body is shorter than an ISO 15552 cylinder of the same bore.
Airtac SUJ Adjustable Cylinder SUJ32X200-100 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X200-100 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X200-100 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X200-100 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X200-100 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X200-100
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X200-100 Is Used
Variable Pitch Pushing
Trimming the extend stroke by up to 100 mm on-site allows a single 32 mm bore actuator to push parts of varying widths into a machining station without swapping cylinders.
Adjustable Diverter Gate
Setting the extend endpoint between 100 and 200 mm lets a diverter arm accommodate different package sizes on a profile-body assembly line.
Variable Depth Stopping
An external stop screw provides a hard mechanical end position for staging pallets, allowing depth tuning without reprogramming the pneumatic controls.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X200-100 with the SAUJ32X200-100
To replace the discontinued SUJ32X200-100, order the direct replacement SAUJ32X200-100, keeping the 32 mm bore, 200 mm nominal stroke, 100 mm adjust window, and 1/8" port. Because this non-magnetic SKU cannot take a switch, if you need position sensing you must move to an SAUJ-S version and use current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B. The 100 mm adjust window is ideal when the exact extend endpoint must be set in the field, beating a fixed SAU plus external stop. Mounting uses SC-series FA or LB brackets. For this 200 mm stroke, check side-load alignment; for held loads, add an external rod lock or pilot-operated check valve, as the stop screw and cushions do not lock the piston.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X200-100
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X200-100 FAQ
Yes, the SUJ32X200-100 is discontinued. The direct replacement is the SAUJ32X200-100, which shares the same 32 mm bore, 200 mm nominal stroke, 100 mm adjust window, 1/8" port, and FA/LB SC-series mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
The nominal 200 mm extend stroke can be shortened by up to 100 mm on-site (usable 100-200 mm). The external stop sets end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X200-100
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X200-100 replacement — usually within 7-8 hours.