This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X200-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X200-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X200-10S is a double-acting profile-type standard cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X200-10S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X200-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X200-10S
The AirTAC SUJ32X200-10S is a double-acting, double-rod profile cylinder with an on-site stroke-trim window. An external stop screw lets you shorten the extend stroke by up to 10 mm, yielding a usable 190-200 mm range from the 200 mm nominal maximum.
This discontinued model drops in directly with the SAUJ32X200-10S, matching the bore, stroke, force, and SC-series FA/LB mounting. The SAUJ upgrade adopts current CMSG/DMSG/EMSG sensors, replacing the legacy CS1-B/DS1-B switches used here. The stop screw sets the end position but is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X200-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X200-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X200-10S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X200-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X200-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X200-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X200-10S Is Used
Probe Contact Tuning
Trimming the extend stroke by up to 10 mm on-site allows precise depth control for testing probes without repositioning the entire fixture.
Diverter Gate Adjustment
Field-tuning the extend endpoint accommodates varying package sizes on a conveyor line, ensuring the diverter gate meets exact product dimensions.
Pusher Stop Calibration
Adjusting the stroke endpoint in the field lets operators calibrate the exact push distance for aligning items against a downstream physical stop.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X200-10S with the SAUJ32X200-10S
To replace the discontinued SUJ32X200-10S, specify the direct replacement SAUJ32X200-10S, which retains the 10 mm adjust window, 1/8" port, and FA/LB mounts. The 10 mm trim window is ideal for fine-tuning the extend endpoint without machining spacers. Because this unit has the -S magnet, upgrade your position sensing from CS1-B/DS1-B to CMSG/DMSG/EMSG. For this 200 mm stroke, verify side-load alignment to prevent rod binding. The external stop sets end position only; it does not lock the load on air loss.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X200-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X200-10S FAQ
Yes, the SUJ32X200-10S is discontinued. The direct replacement is the SAUJ32X200-10S, which matches the 32 mm bore, 200 mm stroke, 10 mm adjust window, and 1/8" port. You must upgrade the position sensors from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG.
The external stop screw shortens the extend stroke by up to 10 mm, giving a 190-200 mm usable range. The stop sets position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X200-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X200-10S replacement — usually within 7-8 hours.