This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X30-20, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X30-20
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X30-20 is a double-acting profile-type standard cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X30-20, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X30-20
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X30-20
The AirTAC SUJ32X30-20 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 20 mm on-site, yielding a usable 10-30 mm extend window from the 30 mm nominal maximum. The compact extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore.
This SUJ model is discontinued and the direct replacement is the SAUJ32X30-20, retaining the same bore, stroke, force, port, and FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors, whereas this legacy unit used CS1-B/DS1-B switches. The stop screw sets the end position but is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X30-20 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X30-20 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X30-20 |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X30-20 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X30-20 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X30-20
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X30-20 Is Used
Short-Stroke Clamping
Adjusts the extend stop on-site to dial in exact clamping depth for delicate workpieces without reprogramming the machine cycle.
Transfer Diverter
Tunes the extend stroke to set the exact pusher distance needed to divert varying product widths off a moving belt.
Carton Lid Folding
Trims the extend stroke by up to 20 mm to fold carton flaps of slightly varying heights without crushing the cardboard.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X30-20 with the SAUJ32X30-20
To replace the discontinued SUJ32X30-20, order the direct replacement SAUJ32X30-20, which matches the 32 mm bore, 30 mm stroke, 20 mm adjust window, 1/8" port, and FA/LB mounting. Choose the 20 mm adjust window if you need field tuning of the extend stroke; the stop screw sets the end position but does not lock the load. Because this non-magnetic SKU lacks a sensor groove, you cannot fit a magnetic switch; the SAUJ upgrade requires CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B. For strokes of 300 mm or longer, verify your side-load limits to prevent excessive guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X30-20
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X30-20 FAQ
Yes, the SUJ32X30-20 is discontinued. The direct replacement is the SAUJ32X30-20, which matches the 32 mm bore, 30 mm stroke, 20 mm adjust window, 1/8" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The external stop screw provides a 20 mm adjust window, allowing the 30 mm nominal extend stroke to be shortened to as little as 10 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X30-20
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X30-20 replacement — usually within 7-8 hours.