This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X35-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X35-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X35-10S is a double-acting profile-type standard cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X35-10S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X35-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X35-10S
The AirTAC SUJ32X35-10S is a discontinued double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 25-35 mm extend out of the 35 mm nominal maximum.
This unit is end-of-life; the direct replacement is the SAUJ32X35-10S, matching bore, stroke, force, port and SC-series FA/LB mounting. The upgrade path moves magnet sensing from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG switches. The stop screw sets end position only—it is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X35-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X35-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X35-10S |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X35-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X35-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X35-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X35-10S Is Used
Short-Stroke Clamping
Dialing in the exact 25-35 mm clamp reach on-site via the stop screw ensures parts seat without overstroking, which is vital when tooling heights vary between batches.
Transfer Diverter Timing
Fine-tuning the extend end position allows a diverter gate to match varying product widths on the line, preventing accidental contact with adjacent items.
Compact Insertion Assembly
The short profile barrel fits tight machine cells while the adjustable stop guarantees delicate components are pressed to the exact depth every cycle.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X35-10S with the SAUJ32X35-10S
To replace the SUJ32X35-10S, order the direct replacement SAUJ32X35-10S, which preserves the 32 mm bore, 35 mm stroke, 10 mm adjust window, 1/8" port and FA/LB mounting. Choose the 10 mm adjust window if you need precise end-position tuning between 25 and 35 mm. Because this is an -S model, swap the legacy CS1-B/DS1-B sensors for CMSG/DMSG/EMSG switches on the SAUJ. As the 35 mm stroke is under 300 mm, side-load rod deflection is minimal, but always confirm pivot alignment to avoid seal wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X35-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X35-10S FAQ
Yes, the SUJ32X35-10S is discontinued. The direct replacement is the SAUJ32X35-10S, which matches the 32 mm bore, 35 mm stroke, 10 mm adjust window, 1/8" port and FA/LB mounting. You only need to upgrade the switches from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG sensors.
The external stop screw provides a 10 mm adjust window, allowing you to shorten the 35 mm nominal extend stroke down to 25 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X35-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X35-10S replacement — usually within 7-8 hours.