This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X35-30S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X35-30S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X35-30S is a double-acting profile-type standard cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X35-30S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X35-30S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X35-30S
The AirTAC SUJ32X35-30S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30mm on-site, yielding a usable 5-35mm stroke from the 35mm nominal maximum. The direct replacement is the SAUJ32X35-30S, sharing the exact bore, force, and SC-series FA/LB mounting.
The SAUJ upgrade transitions from legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches. Remember the stop screw sets end position but is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X35-30S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X35-30S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X35-30S |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X35-30S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X35-30S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X35-30S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X35-30S Is Used
Short-Stroke Positioning
Trimming the extend stroke down to 5mm for precise parts push-off in confined spaces where a fixed 35mm stroke would overrun.
Field Stroke Calibration
Adjusting the end position on-site without disassembling the machine to dial in exact clamping contact.
Variable Depth Forming
Setting a specific 20mm extend stop for light pressing tasks that require repeatable depth control.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X35-30S with the SAUJ32X35-30S
To replace the discontinued SUJ32X35-30S, order the direct replacement SAUJ32X35-30S, which matches the 32mm bore, 35mm stroke, 30mm adjust window, and 1/8" port. Choose the 30mm adjust window when you need precise field tuning of the extend stroke. Retain FA or LB mounting from the SC series. Because this model has the -S magnet, swap legacy CS1-B/DS1-B sensors for CMSG/DMSG/EMSG switches on the SAUJ. For stroke lengths over 300mm, carefully verify side-load limits.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X35-30S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X35-30S FAQ
Yes, the SUJ32X35-30S is discontinued. The direct replacement is the SAUJ32X35-30S, which matches the 32mm bore, 35mm stroke, 30mm adjust window, and 1/8" port. You simply swap legacy CS1-B/DS1-B sensors for current CMSG/DMSG/EMSG switches.
This double-acting double-rod cylinder pushes 402N at 0.5MPa, 563N at 0.7MPa, and 724N at 0.9MPa, with a 345N pull at 0.5MPa and a theoretical max of 82kgf. The external stop screw lets you trim the extend stroke by up to 30mm on-site, giving a usable 5-35mm stroke. The stop sets end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X35-30S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X35-30S replacement — usually within 7-8 hours.