This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X450-30S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X450-30S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X450-30S is a double-acting profile-type standard cylinder with a Ø32mm bore and 450mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X450-30S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke450 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X450-30S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X450-30S
The AirTAC SUJ32X450-30S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30 mm on-site, giving a usable 420-450 mm stroke from the 450 mm nominal maximum.
The direct replacement is the SAUJ32X450-30S, which matches the bore, stroke, force, port, and FA/LB mounting. Upgrading to the SAUJ moves you to current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches on this -S magnet model. The stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X450-30S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X450-30S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X450-30S |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X450-30S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X450-30S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X450-30S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X450-30S Is Used
Variable-Length Ejector
Tuning the extend end position by up to 30 mm on-site to eject parts of varying heights from a fixture without re-mounting the cylinder.
Adjustable Transfer Stop
Acting as a profile-body stop gate where the exact 420-450 mm extend position must be dialed in during commissioning to match varying product widths.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X450-30S with the SAUJ32X450-30S
To replace this discontinued unit, specify the SAUJ32X450-30S, which is a direct for the 32 mm bore, 450 mm stroke, 30 mm adjust window, and 1/8" port. Choose the 30 mm adjust window if you need field tuning of the extend end position; the SAUJ provides the same SC-series FA/LB mounting. Because the -S suffix denotes a piston magnet, note that the SAUJ uses current CMSG/DMSG/EMSG sensors rather than the legacy CS1-B/DS1-B switches. At a 450 mm stroke, minimize side-load and rod-bending by using external guides to support the rod.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X450-30S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X450-30S FAQ
Yes, the AirTAC SUJ32X450-30S is discontinued. The direct replacement is the SAUJ32X450-30S, which matches the 32 mm bore, 450 mm stroke, 30 mm adjust window, 1/8" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches found on this -S model.
The external stop screw has a 30 mm adjust window, allowing you to trim the 450 mm nominal extend stroke down to 420 mm on-site. The stop sets the end position and is not a load lock; use an external rod lock for held loads.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X450-30S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X450-30S replacement — usually within 7-8 hours.