This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X450-40S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X450-40S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X450-40S is a double-acting profile-type standard cylinder with a Ø32mm bore and 450mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X450-40S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke450 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X450-40S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X450-40S
The AirTAC SUJ32X450-40S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 40 mm on-site, yielding a usable 410-450 mm window from the 450 mm nominal maximum. The direct replacement is the SAUJ32X450-40S, matching the 32 mm bore, force, and SC-series FA/LB mounts.
The stop screw sets the end position but is not a load lock; use an external rod lock for held loads. The SAUJ upgrade adopts current CMSG/DMSG/EMSG sensors, replacing this model's legacy CS1-B/DS1-B switches.
Airtac SUJ Adjustable Cylinder SUJ32X450-40S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X450-40S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X450-40S |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X450-40S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X450-40S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X450-40S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X450-40S Is Used
Variable Pitch Pushing
Tuning the extend stroke by up to 40 mm on-site allows a single 450 mm cylinder to feed parts of varying widths into a machining center without swapping the entire actuator.
Adjustable Diverting
Trimming the extend end position lets operators quickly reconfigure a conveyor diverter arm stroke from 450 mm down to 410 mm to accommodate different package sizes on the line.
Custom Depth Insertion
Setting the exact insertion depth on-site via the stop screw ensures delicate components are pressed to precise depths without reprogramming the pneumatic controller.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X450-40S with the SAUJ32X450-40S
To replace the discontinued SUJ32X450-40S, specify the direct replacement SAUJ32X450-40S, which retains the 32 mm bore, 450 mm stroke, 40 mm adjust window, 1/8" port, and FA/LB mounting. Select the 40 mm adjust window if your end-position tuning requires up to a 40 mm extend shortening; remember the external stop sets position but does not lock the load. Because this unit carries the -S magnet suffix, you must migrate from legacy CS1-B/DS1-B switches to the current CMSG/DMSG/EMSG sensors on the SAUJ. At 450 mm stroke, prevent rod bending by supporting side loads with external guides.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X450-40S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X450-40S FAQ
Yes, the SUJ32X450-40S is discontinued. The direct replacement is the SAUJ32X450-40S, which matches the 32 mm bore, 450 mm stroke, 40 mm adjust window, and 1/8" port. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The external stop screw provides a 40 mm adjustment window, allowing you to shorten the 450 mm extend stroke down to 410 mm on-site.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X450-40S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X450-40S replacement — usually within 7-8 hours.