This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ32X75-50S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ32X75-50S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X75-50S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X75-50S is a double-acting profile-type standard cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ32X75-50S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X75-50S
About the Airtac SUJ Adjustable Cylinder SUJ32X75-50S
The AirTAC SUJ32X75-50S is a double-acting, single-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 50 mm on-site. With a nominal 75 mm stroke, the usable extend range is 25-75 mm. The stop screw sets the end position but is not a load lock; an external rod lock is required to hold loads on air loss. This 32 mm bore delivers 402 N push and 345 N pull at 0.5 MPa, scaling to 563 N at 0.7 MPa and 724 N at 0.9 MPa.
This discontinued model is fully replaced by the SAUJ32X75-50S, which preserves the 1/8" port, M10x1.25 rod thread, and 21 mm cushions. The drop-in SAUJ upgrade uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches on this -S magnet model. For sizing, the 402 N @0.5 MPa push yields a safe working load of ~241 N (60% factor) and a ~20 kg vertical lift capacity with a 2:1 margin. The compact extruded aluminum barrel is shorter than standard cylinders of the same bore.
Airtac SUJ Adjustable Cylinder SUJ32X75-50S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X75-50S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X75-50S |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X75-50S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X75-50S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X75-50S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X75-50S Is Used
Variable Depth Boring
Trimming the 75 mm extend stroke down to 25 mm on-site to set precise boring depths in soft materials without swapping the cylinder.
Adjustable Pusher Stops
Tuning the extend end position to handle varying package sizes on a 1/8" port pneumatic conveyor line without mechanical spacers.
Dynamic Sorting Diverts
Field-adjusting the divert stroke by up to 50 mm to accommodate changing product profiles in compact sorting stations.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X75-50S with the SAUJ32X75-50S
To replace the discontinued SUJ32X75-50S, order the drop-in SAUJ32X75-50S, which matches the 32 mm bore, 75 mm nominal stroke, 50 mm adjust window, 1/8" port, and FA/LB mounting. If re-engineering, the neighboring 40 mm bore provides 628 N push at 0.5 MPa, while dropping to a smaller bore reduces force. Choose the 50 mm adjust window if you need to trim the extend stroke on-site from 75 mm down to 25 mm. Note that the SAUJ uses CMSG/DMSG/EMSG sensors to replace the legacy CS1-B/DS1-B switches. For strokes of 300 mm or longer, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X75-50S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X75-50S FAQ
Yes, the SUJ32X75-50S is discontinued. The exact drop-in replacement is the SAUJ32X75-50S, which matches the 32 mm bore, 75 mm stroke, 50 mm adjust window, and 1/8" port. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The 32 mm bore provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and 724 N push at 0.9 MPa. The external stop screw provides a 50 mm adjust window, allowing the 75 mm extend stroke to be shortened to 25 mm on-site. The stop sets end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X75-50S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X75-50S replacement — usually within 7-8 hours.