This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ40X220-20SH, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ40X220-20SH
The AirTAC Airtac SUJ Adjustable Cylinder SUJ40X220-20SH is a double-acting profile-type standard cylinder with a Ø40mm bore and 220mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ40X220-20SH, which matches its bore, stroke, force and mounting.
- BoreØ40 mm
- Stroke220 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.25
- StatusDiscontinued → SAUJ40X220-20SH
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ40X220-20SH
The AirTAC SUJ40X220-20SH is a double-acting double-rod profile cylinder with a 220 mm nominal stroke and a 20 mm external stop screw window, allowing you to trim the extend stroke on-site down to 200 mm without mechanical changes. It features a 40 mm bore, a 1/4" port, and a Viton H high-temperature seal (0 to 150 C).
The direct replacement is the SAUJ40X220-20SH, matching the bore, stroke, adjust window, force, and SC-series FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors, replacing this model's legacy CS1-B/DS1-B switches. The stop screw sets the end position but is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ40X220-20SH Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ40X220-20SH |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ40X220-20SH |
| Bore size | Ø40 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ40X220-20SH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The SAUJ40X220-20SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ40X220-20SH
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ40X220-20SH Is Used
Variable-Length Clamping
Trimming the extend stroke by up to 20 mm on-site allows a clamping fixture to adapt to slight part thickness variations without repositioning the cylinder body.
Adjustable Diverter Arm
A diverting mechanism can fine-tune its reach between 200 and 220 mm to accommodate different product sizes on the line without swapping out the actuator.
High-Temp Sealing Press
The Viton H seal permits operation up to 150 C in a heat-sealing station, while the stop screw precisely sets the crushing distance for varied package thicknesses.
Replacing the Airtac SUJ Adjustable Cylinder SUJ40X220-20SH with the SAUJ40X220-20SH
To replace the discontinued SUJ40X220-20SH, order the direct replacement SAUJ40X220-20SH, which preserves the 40 mm bore, 220 mm stroke, 20 mm adjust window, 1/4" port, and FA/LB mounting. Select the 20 mm adjust window if your application requires fine-tuning the extend stroke between 200 and 220 mm on-site. Because this model includes the -S magnet and -H Viton seal, specify the equivalent SAUJ properties; note that the SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches. For this 220 mm stroke, verify side-load limits per the datasheet. The stop screw sets end position only; it is not a load lock, so add an external rod lock for held loads.
Replacement checklist
- ✓ Same bore / stroke → SAUJ40X220-20SH
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ40X220-20SH FAQ
Yes, the AirTAC SUJ40X220-20SH is discontinued. The direct replacement is the SAUJ40X220-20SH, which matches the 40 mm bore, 220 mm stroke, 20 mm adjust window, 1/4" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches found on this SUJ model.
The 1/4" port and M12x1.25 rod thread are fixed. The external stop screw allows you to trim the extend stroke by up to 20 mm on-site, yielding a usable stroke range of 200-220 mm. The stop sets end position only and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ40X220-20SH
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ40X220-20SH replacement — usually within 7-8 hours.