This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ50X150-10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ50X150-10S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ50X150-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ50X150-10S is a double-acting profile-type standard cylinder with a Ø50mm bore and 150mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ50X150-10S, which matches its bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ50X150-10S
About the Airtac SUJ Adjustable Cylinder SUJ50X150-10S
The AirTAC SUJ50X150-10S is a double-acting single-rod profile cylinder with a 150 mm nominal stroke and an external stop screw that lets you trim the extend stroke by up to 10 mm on-site (yielding a 140-150 mm usable window). Because the stop screw merely sets the end position, it is not a load lock; you must add an external rod lock or pilot-operated check valve if you need to hold a load safely on air loss. The 50 mm bore uses a 1/4" port, a Ø20 mm rod, and adjustable cushions.
This discontinued model is replaced drop-in by the SAUJ50X150-10S, which shares the exact bore, stroke, force, port, and FA/LB mounting. The SAUJ upgrade moves to current CMSG/DMSG/EMSG sensors (this SUJ used legacy CS1-B/DS1-B switches) and offers the SAUF built-in-valve variant the SU line lacked. For force, it pushes 982 N and pulls 825 N at 0.5 MPa; the safe working load is about 589 N (60% of the 0.5 MPa push figure), giving a roughly 50 kg vertical lift capacity with a 2:1 margin.
Airtac SUJ Adjustable Cylinder SUJ50X150-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ50X150-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ50X150-10S |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ50X150-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The SAUJ50X150-10S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ50X150-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ50X150-10S Is Used
Component Sealing Presses
Dialing in the exact crush distance on delicate gaskets or seals by trimming the extend stroke up to 10 mm on-site without machining hard stops.
Flight Transfer Diverters
Adjusting the extend reach to accommodate slight profile changes between different product sizes running on the same packaging line.
Pallet Stop Positioning
Fine-tuning the stopping point of pallets on a roller conveyor by tweaking the rod extension rather than moving the entire cylinder mount.
Replacing the Airtac SUJ Adjustable Cylinder SUJ50X150-10S with the SAUJ50X150-10S
To replace the SUJ50X150-10S, order the SAUJ50X150-10S; it is a true drop-in swap retaining the 50 mm bore, 150 mm stroke, 1/4" port, and FA/LB mounting. If you need to size both ways, the neighbouring 40 mm bore yields 628 N push at 0.5 MPa, while the 63 mm bore yields 1559 N push at 0.5 MPa. Choose the 10 mm adjust window when you only need minor field tuning of the extend position rather than a large stroke reduction. Because this unit has the -S magnet, you must migrate from legacy CS1-B/DS1-B switches to the current CMSG/DMSG/EMSG sensors on the SAUJ. For strokes of 300 mm or longer, verify your side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ50X150-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ50X150-10S FAQ
Yes, the AirTAC SUJ50X150-10S is discontinued. The exact drop-in replacement is the SAUJ50X150-10S, which matches the 50 mm bore, 150 mm stroke, 10 mm adjust window, 1/4" port, and FA/LB mounting. You will need to upgrade your switches from the legacy CS1-B/DS1-B to the current CMSG/DMSG/EMSG sensors.
The double-acting single-rod 50 mm bore provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and 1767 N push at 0.9 MPa, with a theoretical max of 200 kgf at 1.0 MPa. The external stop screw provides a 10 mm adjust window, meaning the 150 mm nominal extend stroke can be shortened to a 140 mm minimum on-site. The stop sets end position only and does not lock the load.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ50X150-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ50X150-10S replacement — usually within 7-8 hours.