This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ50X200-50SH, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ50X200-50SH
The AirTAC Airtac SUJ Adjustable Cylinder SUJ50X200-50SH is a double-acting profile-type standard cylinder with a Ø50mm bore and 200mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ50X200-50SH, which matches its bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ50X200-50SH
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ50X200-50SH
The AirTAC SUJ50X200-50SH is a double-acting double-rod profile cylinder with a 50 mm adjustable-stroke window, allowing you to trim the extend stroke by up to 50 mm on-site (yielding a usable 150-200 mm extend range from the 200 mm nominal maximum). The external stop screw sets the end position precisely but is not a load lock. The -H suffix specifies Viton/FKM seals, extending the operating temperature from -20...+70 °C up to 0-150 °C. It features a 1/4" port, an M16x1.5 rod thread, and 21 mm adjustable cushions.
This SUJ series is discontinued; the direct replacement is the SAUJ50X200-50SH, retaining the same profile body, 50 mm bore, 200 mm stroke, 50 mm adjust window, and force. The -S magnet enabled legacy CS1-B/DS1-B sensors, whereas the SAUJ successor transitions to current CMSG/DMSG/EMSG switches. Note that a standard cylinder drifts on air loss; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ50X200-50SH Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ50X200-50SH |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ50X200-50SH |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ50X200-50SH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The SAUJ50X200-50SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ50X200-50SH
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ50X200-50SH Is Used
Variable Depth Boring
Trimming the extend stroke by up to 50 mm on-site allows operators to fine-tune boring depth without changing the entire cylinder setup.
Adjustable Diverters
Field-tuning the extend end position lets a diverter accommodate varying package sizes on the fly without reprogramming the motion controller.
High-Temp Palletizing
The Viton -H seals handle 0-150 C environments, while the 50 mm stroke adjustment dials in the exact push-off distance for varied pallet loads.
Replacing the Airtac SUJ Adjustable Cylinder SUJ50X200-50SH with the SAUJ50X200-50SH
To replace the discontinued SUJ50X200-50SH, specify the SAUJ50X200-50SH as a direct, matching the 50 mm bore, 200 mm nominal stroke, 50 mm adjust window, 1/4" port, and FA/LB mounting. The 50 mm adjust window is ideal if your extend stroke needs field tuning between 150 mm and 200 mm, often beating a fixed SAU plus external stop. Because this model has the -S magnet, you must upgrade from legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches. For strokes of 300 mm or longer, carefully verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ50X200-50SH
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ50X200-50SH FAQ
Yes, the SUJ50X200-50SH is discontinued. The direct replacement is the SAUJ50X200-50SH, matching the 50 mm bore, 200 mm stroke, 50 mm adjust window, 1/4" port, and FA/LB mounting. You must upgrade the -S magnet sensors from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG.
The 50 mm external stop screw window allows you to shorten the 200 mm nominal extend stroke down to 150 mm on-site. The stop sets end position only; it is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ50X200-50SH
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ50X200-50SH replacement — usually within 7-8 hours.