Airtac TACED Guided Compact Cylinder TACED50X70
The AirTAC TACED Guided Compact Cylinder TACED50X70 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X70
The TACED50X70 is a double acting, double rod compact cylinder built to the ISO 21287 short-body format. A 16 mm rod exits BOTH covers, so the 50 mm bore delivers an identical 881.2 N in each direction at 0.5 MPa (1233.7 N at 0.7 MPa) - there is no push/pull imbalance to design around. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guards and gantries where a full-length body will not fit. A fixed TPU bumper at each end absorbs end-of-stroke energy, the S45C hard-chrome rod resists wear, and the female M10x1.5 rod thread takes standard tooling. Ports are 1/8" PT; speed range 30-500 mm/s; operating pressure 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED50X70 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X70 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X70
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X70 Is Used
Symmetric press-fit station
Equal 881.2 N force on approach and return lets one cylinder seat a bearing into a housing and retract the arbor with the same authority, with the twin guide yoke keeping the punch square.
Dual-side gripper actuation
The through-rod drives a clamp pad on each cover of a machining-cell fixture, gripping a 40 kg aluminium casting from both sides with matched force and no rotation.
Pick-and-place lift module
Mounted FB-flange on a packaging gantry, the 70 mm stroke lowers a vacuum plate about 45 kg-rated onto cartons and retracts it, with the TPU bumpers softening both ends of travel.
Is the Airtac TACED Guided Compact Cylinder TACED50X70 the Right Cylinder?
At 881.2 N per direction, the 50 mm bore sits between the 40 mm (571.8 N) and 63 mm (1458.1 N) options - step down for lighter clamping, up when the load grows. The 70 mm stroke is within the 250 mm standard range for this bore, so no made-to-order build is needed. This code has no S, so there is no magnet and no switch can be fitted; order TACED50X70S if you need CMSE / DMSE position sensing. FB flange mounting is available; the female M10x1.5 rod thread is fixed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve for a held load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X70 FAQ
Yes - because a rod exits both covers, both strokes work on the rod-side area. At 0.5 MPa you get 881.2 N in each direction; at 0.7 MPa, 1233.7 N both ways; the maximum at 1.0 MPa is 179.7 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body with roller-burnished bore, threaded aluminium covers, S45C hard-chrome rod and a fixed TPU bumper at each end. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Switches are not possible on this code - the magnet comes only with the optional -S version (TACED50X70S), which accepts CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.