Airtac TACED Guided Compact Cylinder TACED63X10
The AirTAC TACED Guided Compact Cylinder TACED63X10 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X10
The TACED63X10 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 63 mm bore delivers 1458.1 N in each direction at 0.5 MPa (2041.3 N at 0.7 MPa), equal both ways because a rod exits both covers and both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a press plate or gripper stays square without an external guide. The 10 mm stroke suits short clamp-and-return moves at 30-500 mm/s.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting this 63 mm unit slot into tight jigs and gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the S45C hard-chrome rod with M10x1.5 female thread takes standard tooling. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um; ports are 1/8" PT.
Airtac TACED Guided Compact Cylinder TACED63X10 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X10 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X10
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X10 Is Used
Short-stroke press fitting
A 10 mm stroke with 1458.1 N per direction at 0.5 MPa presses bearings or bushings into housings on a small assembly cell, with the twin guide yoke keeping the punch square.
Clamping welded brackets
Fixture clamping of steel brackets before welding: the double rod grips and releases with equal 2041.3 N at 0.7 MPa, and the compact body fits inside the jig frame.
Pick-and-plate indexing
On electronics assembly lines the non-rotating yoke advances a vacuum plate 10 mm and back without twist; add the -S magnet later for CMSE / DMSE end-position sensing.
Is the Airtac TACED Guided Compact Cylinder TACED63X10 the Right Cylinder?
At 63 mm bore you sit between the 50 mm frame (881.2 N at 0.5 MPa) and the 80 mm frame (2356.2 N at 0.5 MPa); pick 63 when 875 N of usable force covers the job but 50 feels marginal. The 10 mm stroke is well inside the standard range for this bore, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay held. This version has no magnet; order the -S code if you want CMSE / DMSE switch positioning, and choose FB flange or CA/CB/CR/FTC mounts to suit the machine frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X10 FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes work on the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, identical extend and retract, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so a 63 mm bore fits shallow fixtures and gantries. End-of-stroke shock is taken by fixed TPU bumpers, not adjustable air. Sensing is not fitted as standard: order the -S magnet version to run CMSE or DMSE switches along the body slots; without -S there is no magnet and no switch can be read.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.