Airtac TACED Guided Compact Cylinder TACED63X55
The AirTAC TACED Guided Compact Cylinder TACED63X55 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X55
A double acting compact cylinder built to ISO 21287, the TACED63X55 pushes a 63 mm bore through a 55 mm stroke with a rod leaving both covers, so the force is identical in each direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guards and gantries.
The hard-anodized aluminium body carries a roller-burnished bore, the S45C rod is hard-chrome plated, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the rod end is female M10x1.5 with a 1/8" PT port.
Airtac TACED Guided Compact Cylinder TACED63X55 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X55 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 55 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X55
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X55 Is Used
Symmetric clamp fixtures
A machining cell clamping aluminium extrusions from both sides needs equal force each way; the through-rod gives 1458.1 N on both faces at 0.5 MPa from one compact body.
Centering grippers on robot end-of-arm tooling
Twin guide rods keep the jaws from rotating while the double rod delivers the same 2041.3 N at 0.7 MPa on open and close, all within a body about 50% shorter than an ISO 15552 profile cylinder.
Is the Airtac TACED Guided Compact Cylinder TACED63X55 the Right Cylinder?
At 1458.1 N per side at 0.5 MPa, this bore sits between the 50 mm frame (881.2 N) and the 80 mm frame (2356.2 N), so pick the TACED50X... when the load is under 500 kgf-class and step up to 80 mm for heavier clamping. The 55 mm stroke is within the standard range for bore 63, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. Mounting is FB flange, and if you need position feedback, order the -S code so CMSE or DMSE switches can be fitted; without -S there is no magnet in the piston.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X55 FAQ
Yes. Because a rod exits both covers, both sides work on the rod-side area, so force is equal either way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a peak of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/8" PT with an M10x1.5 female rod thread.
Sensing needs the optional -S magnet code; with -S ordered, CMSE or DMSE switches read position along the body slots, but without -S no magnet is fitted and no switch will trigger. Deceleration at each end comes from a fixed TPU bumper, not an adjustable air arrangement, so for soft stops over the last few millimeters control the speed with flow valves. The body is hard-anodized aluminium to ISO 21287, roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, and FB flange mounting is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X55
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.