This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X160S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X160S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X160S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S
The AirTAC B06-SID100X160S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the base SID100X160S, mechanically identical in every spec. Because a rod exits both ends on one piston, both faces use the rod-side area, yielding equal push and pull force of 3681 N at 0.5 MPa. This model is discontinued; the direct replacement is the SAID100X160S, sharing the same G1/2 port, M20x1.5 rod thread, and 36mm cushions.
Replacing it with the SAI family brings an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life. The double-rod design prevents rotation and lets the rear rod carry a sensor cam. The -S suffix denotes a built-in piston magnet for legacy CS1-B/DS1-B switches.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X160S |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X160S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X160S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S Is Used
Battery Cell Stacking
Equal both-ways force drives precise electrode stacking and pressing in cell assembly, maintaining parallelism without rod-side force drop.
Module Transfer Handling
The anti-rotation double-rod design securely indexes battery modules along conveyor lines, using the rear rod to trigger reed sensors.
Pack Tab Welding
Dual-tool driving applies consistent clamping for busbar and tab welding operations, ensuring uniform contact pressure across the pack.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S with the B06-SAID100X160S
To replace the discontinued B06-SID100X160S, specify the SAID100X160S, which reuses the exact ISO 15552 mounting interface (Basic, FA, LB, TC) without bracket changes. Size both directions by confirming the 3681 N @0.5 MPa (5153 N @0.7) equal force is sufficient; if not, step up to bore 125 or down to 80. Choose a double-rod cylinder when you need anti-rotation, dual-tool driving, or a back-rod sensor cam. The -S magnet supports legacy CS1-B/DS1-B sensors. For this 160mm stroke, side-load is minimal, but for strokes >=300mm ensure guide alignment to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X160S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X160S FAQ
Yes, the B06-SID100X160S battery-manufacturing dedicated cylinder is discontinued. The direct replacement is the SAID100X160S. It shares the same 100mm bore, 160mm stroke, G1/2 port, and ISO 15552 mounting. The B06- prefix is an industry designation only, so the SAI replacement matches all physical specs.
Force is equal both ways: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. Note that air cushions only decelerate; for held loads use an external rod lock or SAIL/BSAI variant.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X160S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X160S replacement — usually within 7-8 hours.