This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X175, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X175, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X175
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175
The AirTAC B06-SID100X175 is a discontinued double-acting double-rod ISO 15552 cylinder where the rod exits both ends, yielding equal push and pull force of 3681 N at 0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID100X175. As an end-of-life product, its direct replacement is the SAID100X175, which retains the G1/2 port, M20x1.5 rod thread, and 36mm adjustable cushions.
Because both faces use the rod-side area, force is equal both ways (5153 N at 0.7 MPa, 6626 N at 0.9 MPa). The SAI replacement upgrades the piston seal with two Y-shaped one-way elements for lower start-up pressure. Note this SKU lacks a magnet (-S) and cannot take a sensor; air cushions only decelerate, so use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X175 |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X175 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X175 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175 Is Used
Battery Cell Stacking
Equal both-ways force drives precision stacking plates in prismatic cell assembly, preventing drift during the press cycle.
Module Tabbing Transfer
The rear rod extension simultaneously carries a sensor cam or secondary tool, synchronizing tab handling on both sides.
Pack Handling Pusher
Anti-rotation stability from the dual-rod design securely pushes heavy battery packs onto conveyors without torsional deflection.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175 with the B06-SAID100X175
To replace the discontinued B06-SID100X175, specify the SAID100X175 direct, reusing the existing ISO 15552 mounting interface (Basic, FA, LB, TC) without bracket changes. Size both ways by verifying the equal 3681 N force at 0.5 MPa is sufficient; if not, step up to bore 125 (5734 N) or down to bore 80 (2268 N). A double rod is right when you need anti-rotation stability or need to drive a tool from the back end. Because this non-magnetic SKU cannot fit a switch, order a -S model if sensing is required. For this 175mm stroke, side-load is minimal, but for strokes >=300mm ensure guide alignment to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X175
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175 FAQ
Yes, the B06-SID100X175 (battery-manufacturing dedicated variant of SID100X175) is discontinued. The direct replacement is the SAID100X175, sharing the same ISO 15552 interface, 100mm bore, 175mm stroke, G1/2 port, and equal both-ways force.
It features a G1/2 port and M20x1.5 rod thread. As a double-rod cylinder, force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. Speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X175
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X175 replacement — usually within 7-8 hours.