This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID63X300 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID63X300 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø63mm bore and 300mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID63X300, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke300 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → B06-SAID63X300
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300
The AirTAC B06-SID63X300 is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, making push and pull force equal at 1402 N (@0.5 MPa). The B06- prefix marks this as AirTAC's battery-manufacturing dedicated variant, mechanically identical to the standard SID63X300 with a 63mm bore, 300mm stroke, and G3/8 port. This SID model is discontinued and the exact drop-in replacement is the SAID63X300, which reuses the same ISO 15552 mounting interface and adds an upgraded piston seal using two Y-shaped one-way elements for lower start-up pressure and longer life.
Because both faces use the rod-side annular area, force is equal both ways (1962 N @0.7 MPa, 2523 N @0.9 MPa). A computed buyer insight for sizing: safe working load is ~841 N (60% of the 0.5 MPa force), yielding a vertical lift capacity of ~71 kg with a 2:1 margin. Note this SKU lacks the -S magnet and cannot take a sensor. A plain cylinder does not hold loads on air loss; the 30mm adjustable cushion only decelerates near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID63X300 |
| Bore size | Ø63 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID63X300 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The B06-SAID63X300 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300 Is Used
Cell Stacking Assembly
Equal both-ways force drives precise electrode stacking and handling in battery cell production without the rotational drift of single-rod units.
Module Tab Welding
The rear rod extension carries a sensor cam or secondary tool for battery module tab welding, synchronizing dual-end motion in compact lines.
Pack Transfer Handling
Anti-rotation properties guide battery packs smoothly through 300mm transfer stations, maintaining alignment without external guides.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300 with the B06-SAID63X300
To replace the discontinued B06-SID63X300, drop in the SAID63X300 directly; it matches the 63mm bore, 300mm stroke, G3/8 port, and ISO 15552 mounting (Basic, FA, LB, TC). Size both directions by the equal both-ways force: 1402 N @0.5 MPa, 1962 N @0.7 MPa, 2523 N @0.9 MPa. If less force is needed, the 50mm bore provides 825 N @0.5 MPa; if more, the 80mm bore provides 2268 N @0.5 MPa. A double rod is right when you need anti-rotation, a back rod to carry a sensor cam, or to drive two tools. For the 300mm stroke, use external guides to prevent rod bending and side-load wear. This non-magnetic SKU cannot take switches; choose the -S option for legacy CS1-B/DS1-B sensor accuracy.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID63X300
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X300 FAQ
Yes, the B06-SID63X300 is discontinued. The exact drop-in replacement is the SAID63X300. The B06- prefix simply marks it as the battery-manufacturing dedicated variant; mechanically it is identical to the SID63X300. The SAID replacement shares the same 63mm bore, 300mm stroke, G3/8 port, and ISO 15552 mounting interface, but adds an upgraded piston seal.
Because it is a double-rod cylinder, force is equal both ways: 1402 N @0.5 MPa, 1962 N @0.7 MPa, and 2523 N @0.9 MPa. The bore is 63mm with a G3/8 air port, M16x1.5 rod thread, and 30mm adjustable cushions. Speed is 30-800 mm/s. Safe working load is ~841 N at 0.5 MPa.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID63X300
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID63X300 replacement — usually within 7-8 hours.