Airtac SAI40 Standard Air Cylinder SAI40AX45
The AirTAC Airtac SAI40 Standard Air Cylinder SAI40AX45 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke45 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40AX45
The AirTAC SAI40X45 is a double-acting ISO 15552 profile cylinder engineered for compact, high-cycle tasks. Delivering a push force of 879 N at 0.7 MPa, this 40 mm bore unit is tailored for short 45 mm strokes where rapid positioning matters. The extruded aluminum barrel skips traditional tie-rods, yielding a sleeker profile while maintaining standardized mounting dimensions.
This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance over standard carbon steel. It utilizes PT tapered port threads (G1/4) and lacks a standard magnet, meaning position sensing via CMSE or DMSE switches is not supported without modification. As a genuine AirTAC component, it guarantees reliable pneumatic performance.
Airtac SAI40 Standard Air Cylinder SAI40AX45 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40AX45 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40AX45
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40AX45 Is Used
Short-Stroke Clamping
Ideal for securing lightweight machined components during secondary milling or drilling operations.
Package Diverting
Provides rapid actuation for small package routing gates in high-speed logistics lines.
Tool Ejection
Excels at ejecting small formed parts from press dies over a compact 45 mm travel distance.
Is the Airtac SAI40 Standard Air Cylinder SAI40AX45 the Right Cylinder?
Choose the SAI40X45 when an application demands a brief 45 mm stroke with moderate force. If your push requirements fall below 628 N at 0.5 MPa, stepping down to the 32 mm bore variant is advisable. Conversely, loads exceeding 982 N at 0.5 MPa necessitate the 50 mm bore model. Because the stroke is under 300 mm, side-load stress on the rod bearing is minimal, though external guides are still recommended for heavy off-center loads.
This model serves as a direct dimensional direct replacement for any ISO 15552 cylinder with a 40 mm bore, 45 mm stroke, and G1/4 ports. Mounting is highly versatile using FA or LB accessories. Note that because air pressure both extends and retracts the rod, this standard cylinder will drift if supply pressure is lost; use a SAIL variant if absolute load holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40AX45 FAQ
At a standard operating pressure of 0.7 MPa, this 40 mm bore cylinder provides a push force of 879 N and a pull force of 528 N.
Yes, the SAI40X45 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface, 40 mm bore, and G1/4 port size, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40AX45
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.