Airtac SAI40 Standard Air Cylinder SAI40BX700
The AirTAC Airtac SAI40 Standard Air Cylinder SAI40BX700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke700 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40BX700
The AirTAC SAI40X700 is a double-acting ISO 15552 profile cylinder featuring a 40mm bore and a 700mm stroke. It generates 628N of push force and 528N of pull force at 0.5 MPa, making it well-suited for automated machinery requiring extended reach. The extruded aluminum barrel omits tie rods, providing a smooth exterior that simplifies cleaning and reduces debris accumulation.
This specific configuration utilizes a SUS304 stainless steel rod (material code B), offering superior corrosion resistance for humid or washdown environments. Because a magnet is not specified, the barrel's integrated sensor grooves remain available for future automation upgrades if needed.
Airtac SAI40 Standard Air Cylinder SAI40BX700 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40BX700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40BX700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40BX700 Is Used
Extended Transfer Pushing
Provides the 628N push force needed to divert or index heavy pallets along long conveyor lines without requiring intermediate actuators.
High-Reach Material Handling
The 700mm stroke reaches across wide machine beds to transfer components between processing stations efficiently.
Corrosion-Resistant Actuation
The SUS304 stainless steel rod excels in packaging machinery where frequent washdowns or high ambient humidity would degrade standard carbon steel rods.
Is the Airtac SAI40 Standard Air Cylinder SAI40BX700 the Right Cylinder?
Choose this 40mm bore when a 32mm cylinder (providing 402N push at 0.5 MPa) lacks the necessary thrust, but a 50mm bore (982N push at 0.5 MPa) would be overkill. The 700mm stroke falls within the standard maximum of 1200mm for this bore size. However, at this extended length, the unsupported rod is highly susceptible to bending under side loads. To prevent premature seal wear and rod-bearing failure, implement an external linear guide or select a guided cylinder module.
As a true ISO 15552 standardized cylinder, this model serves as a direct dimensional replacement for other ISO 15552 profile cylinders. It features a PT G1/4 port, an M12x1.25 rod thread, and adjustable air cushions at both ends. Note that standard double-acting cylinders do not hold loads safely upon air loss; for vertical applications requiring fail-safe holding, consider the SAIL locking variant or an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40BX700 FAQ
At 0.5 MPa, the SAI40X700 provides 628N of push force and 528N of pull force. When operating at 0.7 MPa, the push force increases to 879N.
Yes. It is manufactured to the exact ISO 15552 profile standard, making it dimensionally interchangeable with other ISO 15552 cylinders of the same bore size, ensuring straightforward mounting and port replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40BX700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.