Airtac SAI63 Standard Cylinder SAI63BX35S
The AirTAC Airtac SAI63 Standard Cylinder SAI63BX35S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 35mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke35 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI63 Standard Cylinder SAI63BX35S
The AirTAC SAI63X35-S is a double-acting ISO 15552 profile cylinder engineered for short-stroke actuation. Delivering a push force of 1559 N at 0.5 MPa, it excels in compact positioning tasks. The extruded aluminum barrel omits tie rods, presenting a clean exterior that resists impact in tight machinery layouts.
This specific configuration incorporates a SUS304 stainless steel piston rod for superior corrosion resistance. Equipped with a -S magnet, it directly supports CMSE and DMSE sensor switches via the dual side grooves. Fluid connections use PT tapered threads, ensuring a robust, leak-free pneumatic seal.
Airtac SAI63 Standard Cylinder SAI63BX35S Technical Specifications
| Model | Airtac SAI63 Standard Cylinder SAI63BX35S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI63 Standard Cylinder SAI63BX35S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI63 Standard Cylinder SAI63BX35S Is Used
Component Clamping
Provides 1559 N of holding force to secure steel plates during machining operations.
Package Diverting
Executes rapid 35 mm strokes to push products off a high-speed sorting line.
Gate Actuation
Reliably opens and closes small pneumatic process gates in washdown environments.
Is the Airtac SAI63 Standard Cylinder SAI63BX35S the Right Cylinder?
Choosing this 63 mm bore over the smaller 50 mm variant upgrades your thrust from 982 N to 1559 N at 0.5 MPa, which is critical if overcoming higher friction. Conversely, if your load requires less energy, stepping down reduces air consumption. The 35 mm stroke keeps the rod unsupported length minimal, mitigating side-load bending risks.
Because this is a double-acting cylinder, it cannot hold a load if air pressure drops; use the SAIL variant for pneumatic locking needs. To match an existing ISO 15552 footprint, verify the 63 mm bore, 35 mm stroke, G3/8 PT port, and required mounting accessory before requesting a quote.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI63 Standard Cylinder SAI63BX35S FAQ
At 0.5 MPa operating pressure, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force increases to 2182 N.
Yes, it is built to the ISO 15552 standard, making it dimensionally interchangeable with other ISO 15552 profile cylinders. Always confirm your port size and mounting dimensions match.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI63 Standard Cylinder SAI63BX35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.