Airtac SC100 Standard Cylinder SC100X160LB
The AirTAC Airtac SC100 Standard Cylinder SC100X160LB is a genuine double-acting standard air cylinder with a Ø100mm bore and 160mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke160 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X160LB
The AirTAC SC100X160LB is a robust double-acting tie-rod cylinder with a 100 mm bore and 160 mm stroke, factory-equipped with an LB axial foot mount (F-SC100LB) for secure surface installation. It generates 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa, making it a strong mid-range actuator for industrial linear motion.
This model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT1/2 port connections. The 29 mm adjustable air cushion at each end decelerates the piston smoothly, protecting end caps during high-cycle operation. With a body length A of 188 mm, the total extended length is approximately 348 mm. The standard TPU seals suit ambient temperatures from -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X160LB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X160LB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X160LB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X160LB Is Used
Conveyor Diverter Gates
The 3927 N push force at 0.5 MPa easily actuates heavy diverter gates on wide conveyor lines, directing pallets or bulk packages with the LB foot mount providing a rigid, bolted foundation.
Press-Fit Assembly Stations
Delivers up to 7068 N at 0.9 MPa for consistent press-fit insertion of bearings or bushings. The 160 mm stroke offers ample clearance for part loading and ejection in semi-automated cells.
Pallet Stop & Lift Mechanisms
Used in pallet handling systems to stop and lift heavy loads. The adjustable cushion absorbs impact energy smoothly, reducing noise and mechanical shock in high-throughput logistics hubs.
Is the Airtac SC100 Standard Cylinder SC100X160LB the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3900 N of push force at standard shop air; if you need closer to 2500 N, step down to the SC80 (2513 N at 0.5 MPa). For higher force up to 6100 N, the SC125 is the next step. The 160 mm stroke is well within the 1500 mm maximum standard stroke for this bore.
To ensure a correct replacement, match five points: 100 mm bore, 160 mm stroke, PT1/2 port thread, LB foot mounting (F-SC100LB), and confirm whether a magnet is required (this model has no built-in magnet). The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X160LB FAQ
At 0.5 MPa the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf. Always apply a safety factor for real-world dynamic loads.
No. The SC series is a tie-rod cylinder with a shorter overall body length than ISO 15552 profile cylinders. It is not dimensionally interchangeable. It directly replaces another AirTAC SC100 cylinder with the same stroke, PT port, and LB foot mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X160LB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.