Airtac SC100 Standard Cylinder SC100X160N
The AirTAC Airtac SC100 Standard Cylinder SC100X160N is a genuine double-acting standard air cylinder with a Ø100mm bore and 160mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke160 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X160N
The SC100X160N is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at the 0.9 MPa maximum operating pressure). With a 100 mm bore and a 160 mm stroke, this model is built for medium-duty linear applications that demand high force in a compact footprint. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end ensure reliable deceleration, while the NBR (nitrile) seals provide dependable sealing for general industrial environments.
This cylinder uses PT1/2 threaded ports and an M20x1.5 rod thread for straightforward pneumatic connections and tooling attachment. The body length A is 188 mm, giving a total extended length of approximately 348 mm. As a genuine AirTAC SC unit, it offers a proven tie-rod design that is shorter than an ISO 15552 cylinder, making it a practical choice where space is constrained but high thrust is non-negotiable.
Airtac SC100 Standard Cylinder SC100X160N Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X160N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X160N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X160N Is Used
Heavy Part Transfer
Moving large fixtures or pallets on conveyor stops and lift-and-carry stations, where the 3927 N push force at 0.5 MPa easily shifts heavy steel or packed goods.
Press & Clamp Actuation
Powering pneumatic toggle clamps, riveting stations, or small forming presses that need a robust 160 mm stroke and consistent force from a tie-rod cylinder.
Damper & Gate Control
Operating heavy dampers, diverter gates, or chutes in material handling, using the adjustable cushion to manage the mass at the end of the 160 mm travel.
Is the Airtac SC100 Standard Cylinder SC100X160N the Right Cylinder?
Select the SC100X160N when your application requires around 4000 N of force at standard plant pressure. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For heavier demands, the 125 mm bore provides 6136 N at the same pressure. Always match the replacement cylinder on all five critical points: 100 mm bore, 160 mm stroke, PT port thread, basic (no) mounting, and the absence of a magnet. The NBR seal material is suitable for standard temperature ranges.
At a 160 mm stroke, the rod bearing is well-supported for axial loads, but any significant side force requires an external guide or rod support to prevent premature seal wear and rod bending. The SC cylinder is a double-acting unit, requiring air pressure for both extension and retraction; it will not hold position if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X160N FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. These values are based on the 100 mm bore and 25 mm rod diameter.
No. The AirTAC SC series is a tie-rod cylinder and is dimensionally shorter than a standard ISO 15552 profile cylinder, so it is not a drop-in interchange. It is a direct replacement only for another AirTAC SC100 cylinder with a 160 mm stroke, PT ports, basic mount, and NBR seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X160N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.