Airtac SC100 Standard Cylinder SC100X160SCA
The AirTAC Airtac SC100 Standard Cylinder SC100X160SCA is a genuine double-acting standard air cylinder with a Ø100mm bore and 160mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke160 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X160SCA
The AirTAC SC100X160SCA is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa, ideal for medium-to-heavy linear actuation tasks. With a 160 mm stroke and a 25 mm diameter hard-chrome plated rod, it provides a robust guided motion for pressing, clamping, and material transfer.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection. The rear single clevis mount (CA type, accessory F-SC100CA) allows the cylinder body to pivot during operation, accommodating angular misalignment in the application.
Airtac SC100 Standard Cylinder SC100X160SCA Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X160SCA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X160SCA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X160SCA Is Used
Pallet Transfer
Pivoting actuator for a gravity roller conveyor diverter, using the rear clevis to swing a gate arm and sort packages by destination lane.
Clamping Fixture
Pivoting clamp arm on a welding jig, where the clevis mount allows the cylinder to retract fully out of the operator's load/unload path.
Hopper Gate Control
Operating a discharge gate on a bulk material hopper, with the magnet sensors confirming full-open and full-closed positions to the PLC.
Is the Airtac SC100 Standard Cylinder SC100X160SCA the Right Cylinder?
When sizing, the SC100 bore generates 3927 N at 0.5 MPa; if your load requires less force, stepping down to an SC80 (2513 N) can reduce air consumption and physical footprint. For strokes over 300 mm, always evaluate side-load conditions on the 25 mm rod—consider an external linear guide or a guided cylinder variant to prevent rod bending and premature bearing wear. To ensure a drop-in replacement, match five points: 100 mm bore, 160 mm stroke, PT port thread, CA rear clevis mounting, and the integrated magnet for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X160SCA FAQ
At 0.5 MPa air pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the code SC100X160SCA indicates a built-in magnet along the barrel, allowing you to clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod tube for contactless position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X160SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.