Airtac SC100 Standard Cylinder SC100X160SH
The AirTAC Airtac SC100 Standard Cylinder SC100X160SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 160mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke160 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X160SH
The SC100X160SH is a double-acting pneumatic cylinder with a 100 mm bore and 160 mm stroke, built on the rugged AirTAC SC tie-rod platform. This model is configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and high-temperature Viton (FKM) seals (-H), shifting the operating range from the standard -20–+70 °C up to 0–+150 °C.
At 0.5 MPa air pressure it pushes with 3927 N and pulls with 3681 N, placing it in a force class suitable for heavy clamping, pressing, and lifting tasks. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end provide robust guidance and smooth end-of-stroke deceleration. With a body length A of 188 mm, the total extended length is approximately 348 mm.
Airtac SC100 Standard Cylinder SC100X160SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X160SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X160SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X160SH Is Used
Hot Press & Molding
Viton seals withstand 0–150 °C, making the SC100X160SH ideal for heated platen presses, composite molding, and thermoforming tools where standard seals would degrade.
Heavy-Duty Clamping
With 3927 N of push force at 0.5 MPa, this cylinder delivers the high holding power needed for CNC fixture clamping and welding jigs, with sensor feedback confirming clamp/unclamp status.
High-Temp Material Handling
The built-in magnet allows end-of-stroke sensing on oven doors, kiln gates, or foundry diverters, while the FKM seals ensure reliable operation in elevated ambient temperatures.
Is the Airtac SC100 Standard Cylinder SC100X160SH the Right Cylinder?
Choose the SC100 bore when your application needs roughly 4000 N of push force at standard shop air—stepping down to an 80 mm bore (2513 N at 0.5 MPa) would halve the available force, while moving up to a 125 mm bore (6136 N) adds significant bulk. For this 160 mm stroke, rod bending is not a primary concern under pure axial loads, but any side force must be managed with an external guide.
When replacing an existing cylinder, match five points exactly: 100 mm bore, 160 mm stroke, PT port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting (no factory bracket). The SC is a tie-rod cylinder and is shorter than an ISO 15552 profile; it is not a drop-in ISO 15552 replacement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X160SH FAQ
At 0.5 MPa (≈73 psi) the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X160SH is a double-acting cylinder and will drift or drop if pressure is exhausted or the directional valve is centered. For load holding without live pressure, you must add a pilot-operated check valve, external rod lock, or mechanical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X160SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.